D1SC Procharger, stock suspension
Thread Starter
TECH Regular
iTrader: (24)
Joined: Aug 2007
Posts: 446
Likes: 0
From: Billings, Montana
D1SC Procharger, stock suspension Trying to gauge interest in a complete D1SC Procharger kit for an f-body.- KIT IS SOLD
$4,000-OBO
Kit Includes:
*Will entertain trades for turbo parts
Looking for 88mm or bigger turbo (T4 Flange)
Looking for a Blow off valve
Looking for an electronic boost controller
Looking for a fuel pressure regulator
Also have a umi style strut tower bar powder coated red. Won't work with my new intake so I'm getting rid of it. I paid $100, make me an offer.
Also have a few stock suspension parts lying around. Stock panhard rod, stock torque arm, and two rear deCarbon shocks off of a 01 Camaro-SOLD. Looking for $10+shipping for phb and ta, and $20+shipping for the shocks. I need to get these out of here.
$4,000-OBO
Kit Includes:
- D1SC Head unit-1000 Miles
- Granatelli Maf
- Two Intake plenums-One polished, on black plastic
- Two radiator hold downs-One polished, one flat black
- Twin 4.5" Intercoolers (Upgrade)
- All silicone couplers, piping, clamps, bolts
- Aluminum J-bracket
- Ati crank pulley
- Ati super dampener (8 rib upgrade)
- Fuel Management Unit
- By-pass valve
- Installation booklet
- Heddman Headers (Brand new 1 3/4)
- Three bottles ATI Oil
- Ati fan and shroud
- Air intake tube and K&N Filter
- All pully's
*Will entertain trades for turbo parts
Looking for 88mm or bigger turbo (T4 Flange)
Looking for a Blow off valve
Looking for an electronic boost controller
Looking for a fuel pressure regulator
Also have a umi style strut tower bar powder coated red. Won't work with my new intake so I'm getting rid of it. I paid $100, make me an offer.
Also have a few stock suspension parts lying around. Stock panhard rod, stock torque arm, and two rear deCarbon shocks off of a 01 Camaro-SOLD. Looking for $10+shipping for phb and ta, and $20+shipping for the shocks. I need to get these out of here.
Last edited by ItsNotStock; Feb 18, 2009 at 04:28 PM.
Ive got a turbonetics t101 thumper turbo. Was used for mockup and just started a couple of times . Not even driving around the block. Also a massive A2W intercooler and Godzilla BOV. all the components have the potential to go mid 7's. Let me know it we can make a trade.
Thread Starter
TECH Regular
iTrader: (24)
Joined: Aug 2007
Posts: 446
Likes: 0
From: Billings, Montana
Bump up.
To clarify I'm looking for partial trades for turbo parts. I already have the turbo kit minus a few things: The turbo itself (need one to mate to a T4 flange, 88mm minimum, BOV, Radiator holddown, Fuel pressure regulator, boost controller).
If you have a conway in your area I would be willing to drop the price as shipping won't be too ridiculous as opposed to going through FedEx/UPS.
Don't be afraid to make offers
To clarify I'm looking for partial trades for turbo parts. I already have the turbo kit minus a few things: The turbo itself (need one to mate to a T4 flange, 88mm minimum, BOV, Radiator holddown, Fuel pressure regulator, boost controller).
If you have a conway in your area I would be willing to drop the price as shipping won't be too ridiculous as opposed to going through FedEx/UPS.
Don't be afraid to make offers
Trending Topics
I have a Garrett 60-1 I'll trade. It's a custom build; .71 A/R compressor, .96 A/R turbine(I have about $2k in it). I'm interested in the whole setup, but not the headers.
Also I have an Aeromotive boost referenced FPR with AN10 supply and AN6 return(maybe trade FPR for STB?).
Also I have an Aeromotive boost referenced FPR with AN10 supply and AN6 return(maybe trade FPR for STB?).
Ill give you my T101 and the godzilla BOV plus $1,500. The bov has never been used and the turbo was only started up a couple of times, no miles or dyno time. I just want the blower kit. Let me know.
