Engine had a bent rod but didn't hurt the block or crank that I can see other than where the piston rubbed the counter weight. Cylinder walls have very little ridge, looks like a fairly low mileage engine. Would be perfect for a iron LS1 build or a stroker. $160 for the block and crank or $125 for the bare block.

7 Pistons and rods $50 shipped
Crank $60 shipped Will more than likely need to be reground
2 sets of EGR exhaust manifolds $55 Shipped for the clean ones and $45 for the muddy rusty ones
EGR Truck intake no sensors $40 shipped
Banged up EGR truck intake no sensors $30 shipped
DBW throttle body $45 shipped
Factory truck motor mounts $33 shipped
Rocker arms with mount $30 shipped
6.0 Rocker arms with mount $40 shipped
Rear cover $25 shipped
Lifter trays from 6.0 $25 shipped
5.3 Lifter trays $25 shipped
A/C mounting bracket $25 shipped
6 Lq4 pistons and rods, some pistons have detonation marks $40 shipped

 

back to the top

 

bump for the day

 

open to trades.

 

edited

 

back to the top.

 

need this stuff gone.

 

bump for the day

 

to the top

 

back to the top

 

to the top

 

interested in the power steering pump. is it the same as the 6.0? i really only need the reservoir.

 

I decided to keep it for my truck, forgot to delete it on here.

 

back to the top

 

back to the top.

 

to the top again.

 

back to the top

 

how much to ship just the block to zip code 11757?

 

$169 shipped to a business, $245 shipped residential via UPS freight. Both are without liftgate so you will need something to unload it, two people could lift it off on a pallet no problem.

 

bump for the day