gtp heads 408 short block fast 90/90 come inside
gtp heads 408 short block fast 90/90 come inside 
3” duals w/ X 400
thunder raceing 7.40 hardened push rods 100$
spohn adjustable chassis mount torque arm spherical
rod ends fully adjustable 300
qa1 rear springs 100
zr1 17*11 rear with new Mickey t 295*45*17 street radials 600
408, All shelf internals.
6.0 Iron block + .030”
Eagle 4.00” stroke crank
Crower Sportsman 6.125” rods
Diamond 11519 4.030” pistons
Mahle rings gapped for 250 of N2O
all arp hardware
Comp 850 lifters
a Cloyes hex-a-just timing set,
ls6 ported and shimmed oil pump
Custom-length Smith Bros CM pushrods,
CM 253/257 64x/64x” 113+3 cam
complete short block 3000
TCI balancer 250
nasty performance billet steel fuel rails 200
race tronix 42 pound injectors sold
Harland sharp rockers 150
ported FAST 90 sold
90mm Nick Williams tb sold
gtp Ported 862 (4.8/5.3) castings 2000
2.055/1.570” SS valves
Custom dual springs/Ti ret.
The heads are stage 3 GTP's with extensive work done by Craig himself. Ferrea Stainless valves, titanium retainers
450 291 221
500 310 227
550 328 231
600 342 233
650 346 234
700 353 236
these heads retail for 3500
idole video clip cold start
all parts are best offer
Last edited by soldeir; Feb 26, 2009 at 09:41 PM.
