FS: BLING 4 UR Top End!! Chrome Jegs Coil Covers - Take A Look >>>

Thread Tools

Search this Thread

Feb 25, 2009 | 04:44 PM

1QUIKWS6

Thread Starter

TECH Addict

iTrader: (64)

Joined: Mar 2002

Posts: 2,382

Likes: 19

From: USA

FS: BLING 4 UR Top End!! Chrome Jegs Coil Covers - Take A Look >>>

SOLD! THANX!

I have a set of new, never installed/used Jegs Coil Covers that have the Jegs logo milled off and have been chromed.

No pics of them installed as I never got that far - car is in garage for winter and I have the rest of the new top end mods to install - decided to go a different route with the valve cover area.
I bought these before they offered the version without the Jegs logo - so I had the logo area milled out to leave an area for any type badge you may want.
Chrome is done by the ONLY guy I will let do work for any of my show cars - he uses a 5-step process, not just 3 as some others do. I've done thousands $$ with him over the years for all my cars - so you can trust the chrome job is done right and will last 4ever. I have referred several LS1Tech members to him that have had work done...
The red accent striping is simply vinyl tape of the right width that was applied after chrome - I can leave it on - or remove it. Obviously I will remove the 'Phoenix Edition' badge and can remove the SLP badge also if need be - both are simply affixed using 3M double sided tape. Area under badges is currently carbon fiber vinyl, but can be changed to anything you wish.
Install is relatively easy: there are (3) brackets for each cover that bolt to the coil packs then accept the (3) Dzus type (quarter turn quik release) fasteners (also chromed) that you can see on the face of each cover.

I originally paid $194 for the covers thru Jegs, $90 each for the chrome plating (I have the receipt), not to mention the shipping/milling charges = $374+ total.

Looking to get $225 shipped within Cont. US.

I can best be reached at jay442@msn.com or by PM...