Z06 injectors, NIB TSP 7.4 Pushrods, Motive 3.42 gear...
Thread Starter
TECH Enthusiast
iTrader: (21)
Joined: Feb 2007
Posts: 614
Likes: 0
From: Ringgold, GA
Z06 injectors, NIB TSP 7.4 Pushrods, Motive 3.42 gear... Z06 injectors 28.8 lb i believe they are. Have roughly 30k miles on them. $60 Shipped
Brand new still in the box texas speed chromemoly 7.4 (stock length) pushrods. SOLD
Brand new still in the box motive 3.42 gears. SOLD
Brand new still in the box texas speed chromemoly 7.4 (stock length) pushrods. SOLD
Brand new still in the box motive 3.42 gears. SOLD
Last edited by Zach79Z; Mar 18, 2009 at 12:00 PM.
Trending Topics
Thread Starter
TECH Enthusiast
iTrader: (21)
Joined: Feb 2007
Posts: 614
Likes: 0
From: Ringgold, GA
Looked this up under the gear/axle faqs sticky.
"12. What is a series 2 or series 3 carrier, and what do I have?
A 2 series carrier is a car that came with 3.08s or lower from the factory (i.e. all of your 2.73 cars). A 3 series carrier is a car that came with 3.23s or higher. This is very important when you order new gears, as they will differ from 2 to 3 series carrier!
"
ALSO here is how you check what gear you have. Just to make sure you dont allready have the gear
"3. What is a gear ratio, and how do I know what I have?
If you have a stock vehicle, look for the RPO codes on the door or in the glove box. GU2 = 2.73, GU5 = 3.23 and GU6 = 3.42. A gear ratio is the number of teeth on one gear compared to another. To find the ratio, you divide the number of teeth on the driven gear by the number of teeth on the driving gear. For instance, the number of teeth on a ring (driven) gear is 41. The number of teeth on a pinion (driving) gear is 10. 41 divided by 10 = 4.10.
"
"12. What is a series 2 or series 3 carrier, and what do I have?
A 2 series carrier is a car that came with 3.08s or lower from the factory (i.e. all of your 2.73 cars). A 3 series carrier is a car that came with 3.23s or higher. This is very important when you order new gears, as they will differ from 2 to 3 series carrier!
"
ALSO here is how you check what gear you have. Just to make sure you dont allready have the gear
"3. What is a gear ratio, and how do I know what I have?
If you have a stock vehicle, look for the RPO codes on the door or in the glove box. GU2 = 2.73, GU5 = 3.23 and GU6 = 3.42. A gear ratio is the number of teeth on one gear compared to another. To find the ratio, you divide the number of teeth on the driven gear by the number of teeth on the driving gear. For instance, the number of teeth on a ring (driven) gear is 41. The number of teeth on a pinion (driving) gear is 10. 41 divided by 10 = 4.10.
"