non-LSX Parts For Sale SBC, LT1, V6, etc.

lt1 performance parts, zr1 wheels, 10 bolt 3-channel rear end

 
Thread Tools
 
Search this Thread
 
Old Mar 11, 2009 | 12:58 PM
  #1  
insanez's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Jan 2004
Posts: 219
Likes: 0
From: In The Fast Lane
Default lt1 performance parts, zr1 wheels, 10 bolt 3-channel rear end

first off I have a Spec Stage 3 clutch, it is used with less than 1000 miles on it, it is only .005 thinner than when it brand new. I took out the clutch due to it was a little to extreme for driving with my little ones in the car. It works like a champ!!! I am going with a mcleod twin. I paid $540 new, asking $250.00 plus shipping. Sold!!!! Thanks!!!

Link to Clutch Pics http://www.cardomain.com/ride/362741/6

next is a griffin aluminum radiator, 2 row 1" tubes with tranny cooler, about 3k miles on it, $200.00 plus shipping SOLD!!!! Thanks!!!!

Full set of zr1 wheels 17x9.5(2) and 17x11(2) with BFG Comp t/a's 275's and 315's they are painted with semi gloss black, no bends in wheels, no curb rash that I can see, tires have alot of tread left. $600 plus shipping, I am taking resonable offers and may trade for 18 or 19 inch wheels/tires or just wheels depending on condition, color, chrome ok if peeling, would redo them to another color.

Link to Wheels http://www.cardomain.com/ride/362741/7

Rear end out of a 95' from rotor to rotor, it had been sitting outside so the rotors are rusty but could be turned, had new pads, $125 Sold!!! Thanks!!!

All parts are in NE Ohio, I can meet you by any close major freeway or interstate to help for a small gas charge. I am willing to deal.

I can email you pics, just pm me your email, if I don't get right back to you it is because my wife is due any day or minute now with our next child, thanks for looking and have great day.

Last edited by insanez; Mar 16, 2009 at 01:01 PM. Reason: Rear sold
Old Mar 11, 2009 | 01:44 PM
  #2  
Turnin20s's Avatar
TECH Addict
iTrader: (12)
 
Joined: Mar 2007
Posts: 2,467
Likes: 0
Default

Is the griffin a direct fit for our cars? And would you be willing to split up the wheels and sell just the rear wheels?
Old Mar 11, 2009 | 01:55 PM
  #3  
insanez's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Jan 2004
Posts: 219
Likes: 0
From: In The Fast Lane
Default

yes the griffin is a direct fit but you do have to do some slight mods to the fan shroud, or just get better fans like I did, it has all the hose connectors installed already, it is ready to mount, I am changing to a straight up setup for more room for a turbo setup.

On the wheels, I will think about it, depends if someone just wants the fronts.
Old Mar 11, 2009 | 02:46 PM
  #4  
insanez's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Jan 2004
Posts: 219
Likes: 0
From: In The Fast Lane
Default

Pending sale on Griffin Radiator.
Old Mar 11, 2009 | 05:54 PM
  #5  
cgroh89's Avatar
TECH Resident
iTrader: (15)
 
Joined: Jan 2008
Posts: 822
Likes: 0
From: Memphis TN
Default

How were the wheels painted? Any pictures?
Old Mar 11, 2009 | 06:49 PM
  #6  
rbaksi's Avatar
TECH Regular
iTrader: (2)
 
Joined: Jun 2007
Posts: 421
Likes: 0
Default

what gears are in the rear end? approx miles?
Old Mar 11, 2009 | 09:36 PM
  #7  
insanez's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Jan 2004
Posts: 219
Likes: 0
From: In The Fast Lane
Default

Originally Posted by cgroh89
How were the wheels painted? Any pictures?
They were painted with high temp black primer then 3 coats of semi gloss high temp paint with ceramic, the paint takes the heat and brake dust and cleans up very easy. I get a link up tomorrow for the pictures, I'm at work right now.

Originally Posted by rbaksi
what gears are in the rear end? approx miles?
3:42 gears, miles approx 85k, don't know, but I had it in for about 1k miles and it was fine, my buddy gave me his ls1 rear with the brakes so I could finish my ls1 brake upgrade, I bought the rear from Cleveland pick a part about a year ago.
Old Mar 12, 2009 | 12:12 AM
  #8  
Andys94Z's Avatar
On The Tree
iTrader: (2)
 
Joined: Mar 2008
Posts: 109
Likes: 0
From: Oak Brook, Il
Default

what would be bottom dolalr on the ZR1's if i came and picked them up from chicago
Old Mar 12, 2009 | 03:28 AM
  #9  
SSmoked1's Avatar
Launching!
iTrader: (21)
 
Joined: Apr 2006
Posts: 242
Likes: 0
From: Parma, Oh
Default

I'll take the rear end. I'm about 20 minutes away from you too. PM me with your # and address.. also good time to pick it up.
Old Mar 12, 2009 | 01:53 PM
  #10  
insanez's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Jan 2004
Posts: 219
Likes: 0
From: In The Fast Lane
Default

pm's sent, I will get pics of the wheels tomorrow for everyone, thanks everyone for being patient, crappy work hours and kids and preggy wife, life is a little crazy,
Thanks
Steve
Old Mar 12, 2009 | 03:27 PM
  #11  
yonerhottlt1's Avatar
TECH Enthusiast
iTrader: (21)
 
Joined: Mar 2009
Posts: 619
Likes: 0
From: Sacramento Ca
Default

Interested in the clutch. Is it the disk and pressure plate for $250?!
Old Mar 12, 2009 | 08:50 PM
  #12  
insanez's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Jan 2004
Posts: 219
Likes: 0
From: In The Fast Lane
Default

yes it is the disc, pp, t/o bearing, bushing, and alignment tool, bushing is new.
Old Mar 13, 2009 | 12:38 AM
  #13  
yardd0g24's Avatar
On The Tree
iTrader: (4)
 
Joined: Mar 2007
Posts: 160
Likes: 0
Default

Can I get some pics of the ZR1's
Old Mar 13, 2009 | 01:49 PM
  #14  
insanez's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Jan 2004
Posts: 219
Likes: 0
From: In The Fast Lane
Default

My camera is not working, I have a buddy bringing his over tomorrow, but to get an idea, click on my user id and go to my profile, there is a pics section, they are horrible pics, and I have pics of the rear off the car here: http://www.cardomain.com/ride/362741/7

thanks
Steve
Old Mar 13, 2009 | 02:24 PM
  #15  
insanez's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Jan 2004
Posts: 219
Likes: 0
From: In The Fast Lane
Default

Radiator SOLD!!!
Thanks
Old Mar 13, 2009 | 10:42 PM
  #16  
insanez's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Jan 2004
Posts: 219
Likes: 0
From: In The Fast Lane
Default

rear end is pending(pretty much sold)
I will definately be posting new fresh pics of the wheels tomorrow morning, and the clutch for the interested users,
thanks again for looking
Steve
Old Mar 13, 2009 | 11:54 PM
  #17  
ZeeTwentyFate's Avatar
TECH Enthusiast
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (19)
 
Joined: Dec 2006
Posts: 516
Likes: 0
From: Lynchburg, Va
Default

if you didnt like the spec youll hate the solid hub Mcleod lol...
Old Mar 14, 2009 | 06:33 AM
  #18  
insanez's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Jan 2004
Posts: 219
Likes: 0
From: In The Fast Lane
Default

my buddy has the mcleod twin disc setup on 2 of his cars and they both drive like a stock vehicle, there just expensive as all hell, but I get a huge discount on them because of where I work, conections baby, conections,LOL.
Old Mar 14, 2009 | 11:36 AM
  #19  
insanez's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Jan 2004
Posts: 219
Likes: 0
From: In The Fast Lane
Default

added pics

Clutch is pending sale already between two people, waiting to hear from number one, the second person has money in hand.
thanks all for looking, this is really helping me.
Old Mar 15, 2009 | 12:36 PM
  #20  
insanez's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Jan 2004
Posts: 219
Likes: 0
From: In The Fast Lane
Default

Clutch sold!!!



All times are GMT -5. The time now is 06:41 AM.