FS: Rear Prostars, AFR Valve Springs, MTI Cam, Intake, etc.
Thread Starter
Joined: Aug 2004
Posts: 3,161
Likes: 0
From: Virginia Beach, VA
SOLD $250 - New MTI C2 Cam - 224/224 .581/.581 112lsa



SOLD $250 - Weiand Aluminum Intake (satin finish). Does not come with hardware.



SOLD$120 - AFR 8017 Valve Springs - installed but never ran. These are the exact springs as Patriot Gold dual and Manley duals. They are good to .600" lift or .
650" lift with shimming.
SOLD $100 - New stock length TSP chromoly pushrods


SOLD $250 local or $300 shipped - 15x8 5.5 BS Prostars with worn ET Streets (will remove if buyer wants). Inside of one wheel has some marring from breaking off wheel studs. Not too bad though since car was only going like 15 mph, cant really see when wheel is on a car. Pics - Third one shows it:




Prices do not include shipping. I am located in Tampa, Fl and will meet within a reasonable distance. I prefer to not ship the wheels.



SOLD $250 - Weiand Aluminum Intake (satin finish). Does not come with hardware.



SOLD$120 - AFR 8017 Valve Springs - installed but never ran. These are the exact springs as Patriot Gold dual and Manley duals. They are good to .600" lift or .
650" lift with shimming.
SOLD $100 - New stock length TSP chromoly pushrods


SOLD $250 local or $300 shipped - 15x8 5.5 BS Prostars with worn ET Streets (will remove if buyer wants). Inside of one wheel has some marring from breaking off wheel studs. Not too bad though since car was only going like 15 mph, cant really see when wheel is on a car. Pics - Third one shows it:




Prices do not include shipping. I am located in Tampa, Fl and will meet within a reasonable distance. I prefer to not ship the wheels.
Last edited by 99FormulaM6; Mar 24, 2009 at 04:37 PM.



