Absolute Speed stage 2 ported 6.0L heads and Nitrous system
*Stage 2 , Hand ported by (Jay) Absolute Speed*
6.0L blower heads
2.02/1.60 race valves
4 angle valve job
Comp duel springs/titaium retainers
bowle work etc
these heads made 582 RWHP on a stock bottom end LS1 with a 224/230 comp blower camshaft @ 10 PSI P1-sc procharger F-body system.
they have maybe 3,000 miles on them, and were taken apart, cleaned inspected and reasemblem by a race motor maching shop here on Long Island.
They are in perfect like new condition
I paid $1,850 + for them
I like $1,000
PM me
thank you for your interest
*I have a NOS nitrous system for sale*,
It was a wet kit at first and then i used it as a dry system in my LS1 camaro.
the system was $600+ the purge was $125 the heater was $150 and the opener was $300 +
i have 50-75-85-100 hp jets,
I have a MTI clear lid with nos lines already set up. that was another $200 +
Parts:
bottle in mint shape, mounting board with black carpet
bottle mounting brackets/nos pressure gauge on bottle
nos nitrous feed lines
soliniods 1 nos , 1 purg and one fuel, for those that want a wet system
Relay, full throttle switch ,
and i had a control switch box made it has arming switches built in
System worked great,at 100hp dry it was a lot of fun and i beat up a lot of cars i removed it 3 years ago, and had it in my garage ever since.
believe it or not i got $1500 in this set up
I think $800 is fair
6.0L blower heads
2.02/1.60 race valves
4 angle valve job
Comp duel springs/titaium retainers
bowle work etc
these heads made 582 RWHP on a stock bottom end LS1 with a 224/230 comp blower camshaft @ 10 PSI P1-sc procharger F-body system.
they have maybe 3,000 miles on them, and were taken apart, cleaned inspected and reasemblem by a race motor maching shop here on Long Island.
They are in perfect like new condition
I paid $1,850 + for them
I like $1,000
PM me
thank you for your interest
*I have a NOS nitrous system for sale*,
It was a wet kit at first and then i used it as a dry system in my LS1 camaro.
the system was $600+ the purge was $125 the heater was $150 and the opener was $300 +
i have 50-75-85-100 hp jets,
I have a MTI clear lid with nos lines already set up. that was another $200 +
Parts:
bottle in mint shape, mounting board with black carpet
bottle mounting brackets/nos pressure gauge on bottle
nos nitrous feed lines
soliniods 1 nos , 1 purg and one fuel, for those that want a wet system
Relay, full throttle switch ,
and i had a control switch box made it has arming switches built in
System worked great,at 100hp dry it was a lot of fun and i beat up a lot of cars i removed it 3 years ago, and had it in my garage ever since.
believe it or not i got $1500 in this set up
I think $800 is fair


