Leather seats, tubular truck manifolds/flanges, 2 step, versafueler, pcm and harness
#1
Staging Lane
Thread Starter
iTrader: (14)
Join Date: Dec 2006
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Leather seats, tubular truck manifolds/flanges, 2 step, versafueler, pcm and harness
Whats up ls1tech!!! Have a few items I would like to put up for grabs. Half of these items are a result of going another direction with the project and the other half I am tired of walking around and my wife wants her spare room back.
First is the full set of leather seats out of my 2000 camaro with 70k miles on it. The seats are in great shape they are just dusty from sitting around and need to be wiped down. The drivers seat has the usuall light wear from getting in and out of the car. The pictures do the seats no justice as one, my camera sucks, two there dusty. If you want me to clean them up and get you a better pic let me know. SOLD
Headers are sold but I still have the flanges!! They are stainless works flanges and are the 3 bolt flange that match the truck manifolds. There is still a few inches of pipe attached to the flanges that you can either weld to or cut off. 50+shipping.
Next I have a Acceleronics versafueler for adapting those huge injectors to your beast. I bought this about a year ago and have wired it up but have yet to run it. Looking for 150+shipping
Lingenfetler 2 step is the next item for sale. I purchased it from a fellow tech member a few months ago so I will cut you guys the same deal he hooked me up with SOLD!!!.
Next is a ecm and harness from my 2000 camaro SS with a six speed. Computer has been tuned fot a 370ci 248/254 speed density setup .Ecm is unlocked so you can make changes. The harness is almost removed from the car I just need to get under the car and finish unpluging the trans but here is a pic of the ecm. I will get pic of the harness once I get it out. Looking for SOLD!!!!.
Upper radiator support from LMP performance. Ran this on my car for a little over a year. In decent shape with a few light scratches that can be worked out. Mainly just scratches from wiping it off with a rag. 75+shipping
Next a set of good low mileage 241 heads for a freinds corvette that we did some horse trading on. I have the springs and retainers as I started to pull that apart to port them but never got to it. SOLD!!!
Some other misc items that I have. If you want pics pm me your email and I will get you hooked up.
Stock radiator-50 bucks
Stock fans-50 bucks
A/C condensor-25 bucks
p/s pump with bracket and reservoir and pulley-SOLD
manley 2.02 intake valves-40 bucks
Flowmaster muffler- single 3" in and single 3" out, offset inlet-50 bucks
Flowmaster muffler-for fbody single in dual out-50 bucks
****Note-I am not sure of the series of the mufflers but I will try and find out.
There it is and as I find more stuff I will post it up.All parts are OBO!!!!!!!!!
First is the full set of leather seats out of my 2000 camaro with 70k miles on it. The seats are in great shape they are just dusty from sitting around and need to be wiped down. The drivers seat has the usuall light wear from getting in and out of the car. The pictures do the seats no justice as one, my camera sucks, two there dusty. If you want me to clean them up and get you a better pic let me know. SOLD
Headers are sold but I still have the flanges!! They are stainless works flanges and are the 3 bolt flange that match the truck manifolds. There is still a few inches of pipe attached to the flanges that you can either weld to or cut off. 50+shipping.
Next I have a Acceleronics versafueler for adapting those huge injectors to your beast. I bought this about a year ago and have wired it up but have yet to run it. Looking for 150+shipping
Lingenfetler 2 step is the next item for sale. I purchased it from a fellow tech member a few months ago so I will cut you guys the same deal he hooked me up with SOLD!!!.
Next is a ecm and harness from my 2000 camaro SS with a six speed. Computer has been tuned fot a 370ci 248/254 speed density setup .Ecm is unlocked so you can make changes. The harness is almost removed from the car I just need to get under the car and finish unpluging the trans but here is a pic of the ecm. I will get pic of the harness once I get it out. Looking for SOLD!!!!.
Upper radiator support from LMP performance. Ran this on my car for a little over a year. In decent shape with a few light scratches that can be worked out. Mainly just scratches from wiping it off with a rag. 75+shipping
Next a set of good low mileage 241 heads for a freinds corvette that we did some horse trading on. I have the springs and retainers as I started to pull that apart to port them but never got to it. SOLD!!!
Some other misc items that I have. If you want pics pm me your email and I will get you hooked up.
Stock radiator-50 bucks
Stock fans-50 bucks
A/C condensor-25 bucks
p/s pump with bracket and reservoir and pulley-SOLD
manley 2.02 intake valves-40 bucks
Flowmaster muffler- single 3" in and single 3" out, offset inlet-50 bucks
Flowmaster muffler-for fbody single in dual out-50 bucks
****Note-I am not sure of the series of the mufflers but I will try and find out.
There it is and as I find more stuff I will post it up.All parts are OBO!!!!!!!!!
Last edited by L"SS"1; 04-01-2009 at 06:32 AM.
#2
Staging Lane
Thread Starter
iTrader: (14)
Join Date: Dec 2006
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Forgot to mention I am located in central oklahoma but travel all over the state on a regular basis so I could meet somebody within the state pretty easily. If your interested make me some offers as this stuff goes on ebay this weekend.
Trending Topics
#15
TECH Veteran
iTrader: (1)
Join Date: Nov 2001
Location: Louisville, KY
Posts: 4,335
Likes: 0
Received 0 Likes
on
0 Posts
Are you selling a set of efans off the car or is that a set from soemthing else. Do you have a pic? PM me please or shoot me some pics to damon@badmonkeymotorsports.com.