Remaining parts removed and new parts added to new thread started with updated more appropriate title.

 

52mm Ported throttle body **SOLD**

 

t t t

 

MSD Ignition Box Wiring Harness Adapter **SOLD**

 

any pics of the intake also who did the port job how does it compare to an lt4

 

Thanks for the inquiry. The intake is only ported on the throttle bores, the runners haven't been touched so its not like the LT4 at all, the runners are just stock LT1 size. The throttle bores were opened up by a local machine shop so I could run a 58 mm tb and Nitrous plate. I don't have any pics at the moment as I just got it off the car the other day and still need to clean it up and get pics. I should be able to get some up later today / tonight for ya if you'd like.

 

3” Steel Drive shaft **SOLD**

 

Is the fpss new?

 

Thanks for the inquiry. Its not brand new, it has been installed and was lightly used for about 2 months.

 

any pics? Lmk

 

sorry for the delayed response. I don't have a pic at the moment but can take some later tonight and get them to you. thanks.

 

Can you send me pics of the wiper arms,thanks!

 

Sorry for the delayed response. I will get some taken and sent to you asap.

thanks for the inquiry.

 

The SLP Fan switch still available? You got a PM.

 

yep still available. pm replied to.

 

was waiting for pics, but sent you a pm

 

Pics of the AC Delco Opti Please - Needin One ASAP But I Pretty Much Need A Guarantee it works, I have paypal.

Also I see your selling an MSD Cap/Rotor - Is there anything wrong with the stock Cap/Rotor or is it not included?

Either post here or send me a shot both front and back ect to...

NitrousJunkie427@yahoo.com

Thanks.

 

wiper arm pics and others coming asap.

Here's a few of the opti. The slight smudge marks on the back are some left over rtv that got smudged on during installation. The opti has less than 3k miles on it and works perfectly. It was removed for no other reason than the motor is being converted to a carburetor set up so the pcm and opti won't be needed or used, etc. I also have the MSD cap and rotor with the same use and mileage if you are interested. I can post pics of those as well if needed.

 

Nitrous Outlet Fuel Pressure Safety Switch **SOLD**

 

list updated, several prices dropped.