Located in York, PA. 17406 I'm selling parts left over from my build.

Moroso Tall Alum valve covers w/coil pack provisions and I have brand new coil brackets in the wrapper and valve cover gaskets. The valve covers have the moroso vacuum releif valve on the front, 12an fitting on the front for a return,location on the rear of the one cover for vacuum gauge and billet valve cover cap. The valve covers had alum tabs welded on so they dont slide off the head when installing removing more helfpul then you know. $425+shipping



Moroso Longer wires for taller valve covers $70+shipping


Diamond pistons 4.030 408ci pistons with -2cc Forged only ran for dynoing.They had to much clearance and had piston rock. So they have some scuffing on the sides that dont effect them at all. $200+shipping have rod bearings ran only for dyno time and rings for the pistons but always recommend new.




My contact info:
Bruce Keith
Location: York, PA. 17406
AIM:FartpipeZ28
email-ecurb3@comcast.net
PM

 

Sale pending on Katech tensioner

 

I have an SLP oil pump and chain which use the spacers. Can I or can i not use the two piece timing cover? Or is a Melling pump considered the only non stock pump?

 

Pm sent

 

If you split up the coil brackets from the valve covers, i'm interested. Thanks!

 

May be interested in the wires....

 

i'll take the tensioner bruce if the other doesnt buy

 

It does not clear the SLP pump Thats what I have and it didnt clear and I didnt want to clearance it and still not work and i was rushed to get the engine together and in the car to be tuned in time so i went with the POS stock cover. The Edelrbock cover would make it **** to pull out a cam or redgree a cam to change where the cam comes on at. The cover will work with the newer or older GTO engines due to both covers are present FYI.

I'll send you a PM hastings on the wires.

The tensioner seems to have been the hot ticket literally within one minute of posting someone had a PM in there and he is first in line and i'm pretty sure he's taking it and paying today once i get shipping prices.

I just received a inquirey on the valve covers minus the coil brackets so those interested in the coil brackets may be getting a return PM soon on those.

Thank you to everyone for their interest.

 

Interested in the ASP Pulley--PM Sent

 

Pulley sold to Choose1
Katech Sold to BLTBABY
2pc cover sold on CF.net to 2resonate
Oil pan pending on CF.net to i forget his board name

STILL HAVE: Valve covers, brackets, and possibly the pistons and wires.

 

Katech tensioner shipped, ASP pulley shipped, 2pc cover sold and possible deal pending on Oil pan and pistons.

 

2pc cover shipped

OIL PAN IS AVAILABLE!!!

 

Excellent condition and follow through -great seller

 

Still need to sell the valve covers, coil pack brackets, wires, pistons!!!!

 

What size rods do these pistons need? I'll take them.. i think haha. I have Paypal ready

 

Actually IM me ShawnMacAnanny i wanted to ask a couple questions about them

 

Shawn I'll hit you up tomorrow sorry for the delay. I believe I'm using a 6.125in rod compstars. I'll look at my papers for that tomorrow and inform you. You're local!!! I'll make you a deal you cant refuse!!!! I'm going to OCMD this weekend you????

 

Haha well i ended up spending the paypal money in my account that was burning a hole in it so im not sure i need pistons anymore. I have an entire spare 6.0L i plan on building this summer but i have my installed 5.7L all apart converting to to EFI and such right now that i decided to finish up first. Your pistons are a great deal though man!

 

What's the best you can do on the valve covers?

 

Any pics of covers on a/the car?