Ok i have alot of misc parts from 3 ls1 cars and 4 ls1 motors .i need to make room so all this stuff needs to go .. some came off a brand new crate motor (cam and pully)and some from a 98 120K trans am and a 130K z28 .

if ur looking for small lilttle parts let me knw i have a lot of misc lsx junk around . all prices are firm and low . and not included shipping or 3% paypal fees ..

if ur interested in any parts lmk and ill get better pics as well as clean up the parts buyer might be interested .

Fs
i have 2 sets of heads
853 heads center bolt of a 50K vett long block complete $100 +sh
806 heads off the 120 trans am 1 cylder has some detonation damage but can be milled and re used all valves and spring are good $40 + sh

set of motor mount pedalstals $30 +sh

set of either set of headers i need to keep 1 pair -no oxygen sensors $40+sh

good condition lifters 2 sets $20 each + sh
2 sets of good conditon pushrods $20 each + sh

2 sets of rockers and guide plates $35 each +sd


1 set of 98 knock sensors $20 + sh
1 98 120k miles piston $10 + sh
ls1 intake $30+ sh
Front , rear & valley covers $30 each + sh
98 perimeter bolt valve covers hardware no coils $25+ sh
2 cams 1 looks brand new off a crate motor $45+ sh
98 cam has minor damage to one of the lobes still works good $20 + sh

misc egr stuff have 2 complete kits make offer.
oil pump (good oil presure when engine was torn aprt) cam retainer plate and cam !!

I also have a 1 complete set ac unit Pulled them from my running f body when i did ac and power sterring delete.. everything needed except belt and ac compressor .!!ac condensor, brackets all high presure lines and hoses kit worked when pulled from both car $100 !!

01 vett 2 piece batwing oil pan , windage tray and pick up tube $100+ sh

good condition clutch and flywheel (unknown brand im sure its oem cost about $300) 2k miles on it lots of life left in it $150 + sh

again if interested in anything let me knw for better pics and parts clean up .


pictures of the damaged 806 heads




lid and intake asembly



the rest of the parts

 

Got a passenger side center bolt valve cover sitting around?

Shoot me a PM with a price shipped to 45662 if you do

 

Do you have valve covers with the 4 bolts down the center?

 

the only sets of ceter bolt valve covers i have are the ones i need for my set of motors sorry guys !

bump !

 

power steering pump is pending sale .
oil pump cam retainer plate and sprocket/chain pending sale !

let me knw what other pics u guys need !

 

with shipping its gona be about 45 $ i have it pending sale but if buyer backs out the first to paypal gets i .

sold as is . was in the back of the 120k(miles on pump ac and stock waterpump might be lower since he did run the deletes for a while) trans am . previous owner did a power steering ac and water pump delete . still had all the stock stuff in the trunk

 

I need a LS1 EGR valve and tubes (pic below) for my '99. I don't what years will work on my '99, and what years won't, though. Have one? How much shipped to 63304? I wouldn't pay over $15 shipped.

Pic: http://s322.photobucket.com/albums/n...ent=9622_1.jpg

 

I want the ps if you didnt sell it.

 

firehawk 15$ shipped sounds ok . i do have it . 2 actually . pm if u want it for paypal info

 

starter pendin payment .as well as motor mounts

bump

 

ok alot of parts pending payment . will clean up whats sold after money is recieved thanks !

 

lid and intake sold !!

rear cover ac unit and starter and mounts pending payment .

 

rear cover up for sale ! let me knw what u guys need !

 

starter and motor mounts sold
oil pump sold
ps and balancer sold
lid and intake sold

lots pending payment .

 

got home late from work today everything will be shiiped out tomorrow morning.

 

everything shipped out today will provide tracking info upon request thanks !

 

bummp !

 

98-99 manifolds?

 

interested in a f-body oil pan w. pick-up tube and windage tray

 

yes 98-99 manifolds 40+shipping

i do have the f body oil pan and pick up tube . no windage tray selling it including the front and rear cover and valley pan for $200