I'm looking for some stock bore (or just a tad oversize) forged pistons. They need to accept .927 pin and 6.125 rod with a stock stroke. Some sort of flat top with around -4 to -8cc...something like that. Nothing special, and preferably somehting on the cheaper end.

 

Sunday bump.

 

need rods too? I have a set of low mile wiseco flat tops on stock rods with arp bolts

 

Still looking.

 

Nothing?

 

bump...

 

I have a set of used 2k miles, Mahle -4cc 3.905 pistons. They are for a .927 pin and 6.125 rod. I will take 425 shipped.

Bill