Forged LS1 flat top pistons
Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
*SOLD* Forged LS1 flat top pistons ***SOLD SOLD SOLD***These are like new mahle 3.898 bore pistons with -4cc valve reliefs. Excellent for building up any street motor since the compression ratio range for this piston will vary from 9.3:1 with a 72cc head to 10.6:1 with a 61cc head.
Bore: 3.898 (stock)
Stroke: 3.622 (stock)
Rod length: 6.125
I had these on my car for a little over 5000 miles and they worked flawlessly under boost and held over 700rwhp without a problem. I'm going bigger and building up an iron block 370 now, so I can't use these pistons. They are in flawless condition, and nothing at all wrong with them. Check my trader rating and the pics- nothing to hide here.
Summit sells these for $650. I'm asking $450 + shipping.
Bore: 3.898 (stock)
Stroke: 3.622 (stock)
Rod length: 6.125
I had these on my car for a little over 5000 miles and they worked flawlessly under boost and held over 700rwhp without a problem. I'm going bigger and building up an iron block 370 now, so I can't use these pistons. They are in flawless condition, and nothing at all wrong with them. Check my trader rating and the pics- nothing to hide here.
Summit sells these for $650. I'm asking $450 + shipping.
Last edited by ChevyChad; May 2, 2009 at 01:09 PM. Reason: sold
