TSP 231/237 cam, 7.4" hardened pushrods, GM L92 head gaskets
TSP 231/237 cam, 7.4" hardened pushrods, GM L92 head gaskets I ran this for about 40K miles in my stock motor and it worked great. I just put in a 408 and had a custom cam ground, so I no longer have a need for this cam.
Specs are 231/237 .598"/.595" 112 LSA.
Asking $200 and I'll split the shipping. *SOLD*
I also have the 7.4" hardened pushrods that I ran with this cam. Looking for $70 shipped. *SOLD*
I bought a set of GM MLS L92 head gaskets when I was building my motor, but went with the LS2 gaskets. These are brand new in the box. *SOLD*
Specs are 231/237 .598"/.595" 112 LSA.
Asking $200 and I'll split the shipping. *SOLD*
I also have the 7.4" hardened pushrods that I ran with this cam. Looking for $70 shipped. *SOLD*
I bought a set of GM MLS L92 head gaskets when I was building my motor, but went with the LS2 gaskets. These are brand new in the box. *SOLD*
Last edited by PAGregSS; May 12, 2009 at 06:46 AM.
I've gotten quite a few PMs about the cam and pushrods and I have a sale pending. I'll be getting a shipping quote on Monday for prospective buyer. I'll update the thread when the sale goes through.
