Machined LS1 block, 6.125 Rods, GM LS1 Crank + A LOT More.

 
Thread Tools
 
Search this Thread
 
Old May 1, 2009 | 04:20 PM
  #1  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default Machined LS1 block, 6.100 Rods, GM LS1 Crank + A LOT More.

Paypal verified over 4+ years. Cash works to. All paypal MUST include 3% increase. Call or e-mail. (916) 960-9094. z34_nut@hotmail.com (also my paypal address)

Items have been updated! Many parts have sold! Make offers on almost anything..

I have a machined LS1 block at 3.908 finished honed with a torque plate. Mahle makes the pistons for that bore. Block has been cleaned, and bagged.


The oil seen in the cylinders is a teflon based lubricant to prevent rust in the bores while in storage.
$300.

Mahle 3.908 pistons.
http://cgi.ebay.com/ebaymotors/CHEVY...QQcmdZViewItem

C5 Corvette Rocker Savers. Brand new, never used, still package. Plastic type, cut outs for jacking pucks, etc. I payed $75 for these.

$55.



F-Body stock air box system. And apperently a stock Corvette Air Box...
$35 for the f-body system, and $10 for the corvette box.



*New Items!*
Rybestos Front blanks for C5 Z06. Rotors, both sides, Brand new in box. Only one box is open for pictures.
$50.


Last edited by z34_nut; Jun 6, 2009 at 02:26 PM.
Old May 1, 2009 | 04:24 PM
  #2  
2resonate's Avatar
Teching In
iTrader: (38)
 
Joined: Mar 2005
Posts: 2
Likes: 0
Default

PM sent.
Old May 1, 2009 | 04:45 PM
  #3  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

PM replied.
Old May 1, 2009 | 07:12 PM
  #4  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

up. open to offers.
Old May 1, 2009 | 09:22 PM
  #5  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

Up to the top
Old May 2, 2009 | 04:35 AM
  #6  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

l92 heads have been added, pm's have been replied... the 6.125 rod length is incorrect, tried to advance edit the title, but it didn't change... sorry if that throws some of you off.
Old May 2, 2009 | 10:01 AM
  #7  
396375's Avatar
9 Second Club
iTrader: (10)
 
Joined: Mar 2008
Posts: 256
Likes: 1
From: Niagara Falls NY
Default

PM sent.
Old May 2, 2009 | 04:01 PM
  #8  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

To the top for saturday.
Old May 3, 2009 | 07:16 PM
  #9  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

All pms repliedp
Old May 3, 2009 | 07:23 PM
  #10  
USMCGunner's Avatar
Teching In
iTrader: (1)
 
Joined: Mar 2009
Posts: 13
Likes: 0
Default

pm sent
Old May 4, 2009 | 12:03 AM
  #11  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

All PM's replied. Not one item includes shipping...
Old May 4, 2009 | 12:12 AM
  #12  
94 s dime's Avatar
TECH Regular
iTrader: (10)
 
Joined: Dec 2006
Posts: 406
Likes: 0
Default

Those are stock length rods right?
Old May 4, 2009 | 03:32 PM
  #13  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

6.098 is stock length.

all pm's replied
Old May 9, 2009 | 08:57 PM
  #14  
Posidon42's Avatar
Teching In
iTrader: (3)
 
Joined: Jan 2008
Posts: 37
Likes: 0
From: Colorado Springs
Default

possibly interested in the l92 heads. PM me when you get them back from the shop.
Old May 11, 2009 | 06:17 PM
  #15  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

heads were sold, sorry.
Old May 11, 2009 | 07:54 PM
  #16  
kdavis's Avatar
11 Second Club
15 Year Member
iTrader: (14)
 
Joined: Jun 2007
Posts: 840
Likes: 1
From: Encinal/Kingsville, Texas
Default

is anyting wrong with the crank?
Old May 12, 2009 | 06:42 PM
  #17  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

Nothing is wrong with the crank that I am aware of. Came out of a perfect running LS1.
Old May 21, 2009 | 01:04 PM
  #18  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

up to the top, read first post!!!
Old May 26, 2009 | 01:56 AM
  #19  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

hope every-one had a safe weekend. All items listed are still for sale!
Old May 26, 2009 | 11:57 AM
  #20  
z34_nut's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2005
Posts: 594
Likes: 1
From: NorCal
Default

PM's replied, TTT



All times are GMT -5. The time now is 02:46 PM.