Custom Made LT1 Water Pump Drive Seal Tools
05-11-2009, 12:20 PM
#1
TECH Addict
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Kzoo, MI
Posts: 2,289
Likes: 0
Received 0 Likes
on
0 Posts
Custom Made LT1 Water Pump Drive Seal Tools. 6/19 GP DONE 6/19/09. All tools have been Sold. GP is finally over. Thanks to all who purchased one 
As far as I know, besides kent moore tools, no one makes the proper tool for installing the the water pump drive seal into the timing cover. Sure you can use a socket, or a sharpie pen body, but the kent moore style tool is very nice. However the kent moore tool comes at a hefty price ($60+), and I'm not even sure you can get it without buying the whole kit.
They are similar to the kent moore tool. I had them drawn up in autocad and then produced on a CNC machine
They are made from aluminum and will be a lot cheaper.
Price is $10.25 Shipped in the U.S. I hate to be mean, but for those in Canada, $11.50 shipped so I can ensure proper postage If international overseas I would have to get an estimate first. (UPDATED PRICE 6/1/09).
Batch 2 has been exhausted. Batch 3 on its way. Batch three has been exhausted.
PM me for my paypal address or mailing address. Include Forum name in payment, so I know who you are! (to prevent trollers from spamming my email)
Simple But Effective Instructions incase you doubt the proper use of tool
http://www.mediafire.com/?zmremmz2kgi I can always email to you to (free file hosting = tons of stupid ads), I just used this place to host it for free
Buyers:
1. alconk (PAID)(SHIPPED)
2. porksoda (PAID)(SHIPPED)
3. apyah(PAID)(SHIPPED)
4. trythsz (PAID)(Shipped)
5. robsquikz28(PAID)(SHIPPED)
6. PWRRTRP(PAID)(SHIPPED)
7. M93Z (PAID)(SHIPPED)
8. everclear4520(PAID)(SHIPPED)
9. IROC-Z28_CAMARO
Batch 3 Buyers:
1. Row x2(PAID)(SHIPPED)
2. lt194caddyz(PAID)(SHIPPED)
3. landstuhltaylor (PAID)(SHIPPED)
4. 2birds1shee(PAID)(SHIPPED)
6/19/09. All tools have been Sold. GP is finally over. Thanks to all who purchased one
As far as I know, besides kent moore tools, no one makes the proper tool for installing the the water pump drive seal into the timing cover. Sure you can use a socket, or a sharpie pen body, but the kent moore style tool is very nice. However the kent moore tool comes at a hefty price ($60+), and I'm not even sure you can get it without buying the whole kit.
They are similar to the kent moore tool. I had them drawn up in autocad and then produced on a CNC machine
They are made from aluminum and will be a lot cheaper.
Price is $10.25 Shipped in the U.S. I hate to be mean, but for those in Canada, $11.50 shipped so I can ensure proper postage If international overseas I would have to get an estimate first. (UPDATED PRICE 6/1/09).
Batch 2 has been exhausted. Batch 3 on its way. Batch three has been exhausted.
PM me for my paypal address or mailing address. Include Forum name in payment, so I know who you are! (to prevent trollers from spamming my email)
Simple But Effective Instructions incase you doubt the proper use of tool
http://www.mediafire.com/?zmremmz2kgi I can always email to you to (free file hosting = tons of stupid ads), I just used this place to host it for free
Buyers:
1. alconk (PAID)(SHIPPED)
2. porksoda (PAID)(SHIPPED)
3. apyah(PAID)(SHIPPED)
4. trythsz (PAID)(Shipped)
5. robsquikz28(PAID)(SHIPPED)
6. PWRRTRP(PAID)(SHIPPED)
7. M93Z (PAID)(SHIPPED)
8. everclear4520(PAID)(SHIPPED)
9. IROC-Z28_CAMARO
Batch 3 Buyers:
1. Row x2(PAID)(SHIPPED)
2. lt194caddyz(PAID)(SHIPPED)
3. landstuhltaylor (PAID)(SHIPPED)
4. 2birds1shee(PAID)(SHIPPED)
6/19/09. All tools have been Sold. GP is finally over. Thanks to all who purchased one
Last edited by buffman; 06-19-2009 at 12:09 PM.
Trending Topics
05-27-2009, 05:38 PM
#11
TECH Addict
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Kzoo, MI
Posts: 2,289
Likes: 0
Received 0 Likes
on
0 Posts
All tools sold! I can do a third batch but it would have to be a smaller number of tools unless enough people are committed. Which means unless I have another 80 buyers, the price would increase to $10.25 shipped in the US since a smaller number of tools would be made.
Matt
Matt
06-01-2009, 10:41 AM
#12
TECH Addict
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Kzoo, MI
Posts: 2,289
Likes: 0
Received 0 Likes
on
0 Posts
I have 25 more tools coming within the week for all of those that have Pm'd me. Ddue to the smaller number of tools run, the cost had to go up. It didn't go up by much though. New price to US and Canadian buyers is listed on the first page (10.25 and 11.50). I can take prepayments as I did before and when the tools arrive they will be immediately shipped out.
Last edited by buffman; 06-01-2009 at 11:22 AM.
06-04-2009, 06:54 PM
#13
TECH Addict
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Kzoo, MI
Posts: 2,289
Likes: 0
Received 0 Likes
on
0 Posts
Third Batch is Done, and will be in my hands within 2-3 days. Now is the time to get one if you haven't already. I probably will not be making anymore for awhile.
