Hugh FS thread - performance parts, cam, rocker ect...
Thread Starter
10 Second Club
iTrader: (16)
Joined: Oct 2005
Posts: 149
Likes: 0
From: Fort Lauderdale ,FL
Hugh FS thread - performance parts, cam, rocker ect... Please include 3% Paypal fees or pick up local and pay Cash, NO LOW BALLERS PLEASE…..
SCE Titan head gaskets they where pulled out of the package but never installed, check link for more details. $70.00 shipped - make offer These are $160 +S/H NEW
Titan Self Sealing Copper, fits Chevrolet Gen 3 (LS) Small Block, Gasket Thickness: .043"; Bore Opening: 3.950"; Package Contents: 1 Pair; Material: Copper with built in coolant and oil seals.
*These Gaskets are to be used with machined O-rings in Block or Head*
*These Gaskets do not require additional sealant*
Patented coolant and oil seals found only on SCE Titan and ICS Titan head gaskets provide superior sealing due to offset upper and lower bead seals and limited sealant area. This unique seal design requires less clamp load to seal coolant passages allowing more clamp load on the combustion seal than other "coated" copper gaskets.
http://www.scegaskets.com/Shop/Contr...id/0/SFV/32777
Ford 9” 4.57 gears like new - $50.00 obo local pick up only
Broken EATON posi for F-body 10 bolt - $20.00 obo local pick up only
Has about 500 miles on it and the 1 track visit that killed it, needs to be rebuilt….
Ford 9” Nodular center chunk - $35.00 obo local pick up only
Needs to be sandblasted and rebuilt….
SCE Titan head gaskets they where pulled out of the package but never installed, check link for more details. $70.00 shipped - make offer These are $160 +S/H NEW
Titan Self Sealing Copper, fits Chevrolet Gen 3 (LS) Small Block, Gasket Thickness: .043"; Bore Opening: 3.950"; Package Contents: 1 Pair; Material: Copper with built in coolant and oil seals.
*These Gaskets are to be used with machined O-rings in Block or Head*
*These Gaskets do not require additional sealant*
Patented coolant and oil seals found only on SCE Titan and ICS Titan head gaskets provide superior sealing due to offset upper and lower bead seals and limited sealant area. This unique seal design requires less clamp load to seal coolant passages allowing more clamp load on the combustion seal than other "coated" copper gaskets.
http://www.scegaskets.com/Shop/Contr...id/0/SFV/32777
Ford 9” 4.57 gears like new - $50.00 obo local pick up only
Broken EATON posi for F-body 10 bolt - $20.00 obo local pick up only
Has about 500 miles on it and the 1 track visit that killed it, needs to be rebuilt….
Ford 9” Nodular center chunk - $35.00 obo local pick up only
Needs to be sandblasted and rebuilt….
Last edited by Z28FirefighterI1; Jun 22, 2009 at 06:49 AM.
