Going back to stock sale, performance parts must go!
Thread Starter
Joined: Aug 2005
Posts: 753
Likes: 5
From: Winston Salem, NC
Going back to stock sale, performance parts must go! putting the car back to stock because its gotta go now... 
all parts came off the car in sig, I prefer paypal but if you want to mail the payment, please do a money order.
here is whats up for grabs:
-- Black Ram Air hood with gold vinyl bird (vinyl should come off easily) SOLD
hood has some peeling clearcoat but otherwise good
$450 local pickup or you arrange shipping
-- hooker ceramic coated LT's and catted true duals (HEADERS SOLD)
TSP duals with cats welded in and tailpipes run under the axle. It's 3" all the way through, and there are 2 flowmaster super 44 mufflers where the stock dual out muffler was located, and single 3" slash cut stainless tailpipes. The tailpipes have some scarring on the bottom from coming out of the driveway, the headers have some rust on the very bottom, and some of the welds are messy looking on the exhaust. It's clamped together in some key places with stainless steel band clamps (no U clamps!!) to make it easier to remove and install, however due to leaks i had the headers are welded to the cats/exhaust. Due to the mufflers being moved to behind the axle, this exhaust never scrapes on anything (except the tailpipes on steep driveways) its actually way better than the original TSP system was for clearance, and it can accommodate two full size mufflers! I will separate if I have a buyer for everything.
$600 + shipping, $670 + shipping with flows
separate: $200 for headers, $400 for exhaust, $70 for flows, all plus shipping
--SLP lid SOLD
some rubbing on the top you can see in the pics
--UMI Panhard Rod SOLD
black, single adjustable, almost new
--Spohn Lower Control Arms
black, almost new, non adjustable
$120 + shipping
--Spohn 25mm rear swaybar
black, almost new
$120 + shipping
--PRC dual springs with locks/titanium retainers/7.425 pushrods SOLD
$200 + shipping OBO
--brand new Melling high pressure oil pump
less than 20 miles on it
$100 + shipping
link to dyno graph of car:
https://ls1tech.com/forums/dynamomet...cmforless.html
Cam/exhaust/headers idle video (with spiral flows):
http://www.youtube.com/watch?v=TkTAoti6qV8
all parts came off the car in sig, I prefer paypal but if you want to mail the payment, please do a money order.
here is whats up for grabs:
-- Black Ram Air hood with gold vinyl bird (vinyl should come off easily) SOLD
hood has some peeling clearcoat but otherwise good
$450 local pickup or you arrange shipping
-- hooker ceramic coated LT's and catted true duals (HEADERS SOLD)
TSP duals with cats welded in and tailpipes run under the axle. It's 3" all the way through, and there are 2 flowmaster super 44 mufflers where the stock dual out muffler was located, and single 3" slash cut stainless tailpipes. The tailpipes have some scarring on the bottom from coming out of the driveway, the headers have some rust on the very bottom, and some of the welds are messy looking on the exhaust. It's clamped together in some key places with stainless steel band clamps (no U clamps!!) to make it easier to remove and install, however due to leaks i had the headers are welded to the cats/exhaust. Due to the mufflers being moved to behind the axle, this exhaust never scrapes on anything (except the tailpipes on steep driveways) its actually way better than the original TSP system was for clearance, and it can accommodate two full size mufflers! I will separate if I have a buyer for everything.
$600 + shipping, $670 + shipping with flows
separate: $200 for headers, $400 for exhaust, $70 for flows, all plus shipping
--SLP lid SOLD
some rubbing on the top you can see in the pics
--UMI Panhard Rod SOLD
black, single adjustable, almost new
--Spohn Lower Control Arms
black, almost new, non adjustable
$120 + shipping
--Spohn 25mm rear swaybar
black, almost new
$120 + shipping
--PRC dual springs with locks/titanium retainers/7.425 pushrods SOLD
$200 + shipping OBO
--brand new Melling high pressure oil pump
less than 20 miles on it
$100 + shipping
link to dyno graph of car:
https://ls1tech.com/forums/dynamomet...cmforless.html
Cam/exhaust/headers idle video (with spiral flows):
http://www.youtube.com/watch?v=TkTAoti6qV8
Last edited by magius231; Jun 13, 2009 at 07:04 AM.
Trending Topics
Thread Starter
Joined: Aug 2005
Posts: 753
Likes: 5
From: Winston Salem, NC
Thread Starter
Joined: Aug 2005
Posts: 753
Likes: 5
From: Winston Salem, NC
maybe UPS can help you? 