Katech Rod Bolts, Walbro Pump, MTI Lid, MAF Ends
LS1 Edit, Autotap, Walbro Fuel Pump, MAF Ends I have the following stuff for sale. I've recently added LS1 Edit and Autotap to the list. All prices include shipping to the lower 48 states. Payments accepted by money order or paypal. Please add 3% for paypal transaction fees.
Walbro 255lph inline fuel pump. Used for about 5000 miles. Includes barbed hose fittings and clamps to install in stock plastic fuel line. $85.00 shipped.
Granetelli composite (plastic) MAF ends. These MAF ends can be used with your stock MAF center (electronics) and offer an alternative to porting and descreening your stock MAF. SOLD.
Katech rod bolts. Brand new in the box. Only opened to inspect. Decided to go another route. SOLD.
MTI Air Lid. This lid has been drilled for an NOS 5177 dry N2O kit, so it has a 3/8in hole on either side of the lid for the dry nozzles (see picture). These holes could be easily plugged off if they weren't going to be used. SOLD.
LS1 Edit Software. Version 1.3. Comes with the tuning software and user manual burnt on a CD and the interface cable as shown. It orginally came with two vehicle licences. I use one licence to tune my car, so there is one licence remaining. This is a full up tuning suite, but at this price would be great even if you just wanted to do the simple things like change fan temps, adjust speedo for different gears/tires, adjust rev limiter, adjust speed limiter, delete EGR, scale for larger injectors......ect. SOLD. The cable connects to your laptop via a 9-pin serial port, so you may need a USB to serial adapter. I'll throw one in free if you also buy the Autotap software below.
Autotap Scanning Software. Comes with the software CD, OBD II cable, and instruction book. Capable of real-time logging, datalogging for future use, and clearing DTCs. Works on all OBD II GM vehicles. SOLD. The cable connects to your laptop via a 9-pin serial port, so you may need a USB to serial adapter. I'll throw one in free if you also buy the LS1 Edit software above.
Let me know if you have any questions.
Walbro 255lph inline fuel pump. Used for about 5000 miles. Includes barbed hose fittings and clamps to install in stock plastic fuel line. $85.00 shipped.
Granetelli composite (plastic) MAF ends. These MAF ends can be used with your stock MAF center (electronics) and offer an alternative to porting and descreening your stock MAF. SOLD.
Katech rod bolts. Brand new in the box. Only opened to inspect. Decided to go another route. SOLD.
MTI Air Lid. This lid has been drilled for an NOS 5177 dry N2O kit, so it has a 3/8in hole on either side of the lid for the dry nozzles (see picture). These holes could be easily plugged off if they weren't going to be used. SOLD.
LS1 Edit Software. Version 1.3. Comes with the tuning software and user manual burnt on a CD and the interface cable as shown. It orginally came with two vehicle licences. I use one licence to tune my car, so there is one licence remaining. This is a full up tuning suite, but at this price would be great even if you just wanted to do the simple things like change fan temps, adjust speedo for different gears/tires, adjust rev limiter, adjust speed limiter, delete EGR, scale for larger injectors......ect. SOLD. The cable connects to your laptop via a 9-pin serial port, so you may need a USB to serial adapter. I'll throw one in free if you also buy the Autotap software below.
Autotap Scanning Software. Comes with the software CD, OBD II cable, and instruction book. Capable of real-time logging, datalogging for future use, and clearing DTCs. Works on all OBD II GM vehicles. SOLD. The cable connects to your laptop via a 9-pin serial port, so you may need a USB to serial adapter. I'll throw one in free if you also buy the LS1 Edit software above.
Let me know if you have any questions.
Last edited by GC99TA; Aug 13, 2009 at 01:50 AM.
