OFFICIAL LS1TECH SALE THREAD HERE...

https://ls1tech.com/forums/sponsor-s...l#post11702272

Repost...

I have spent the past three hours updating my site with new tips that we offer and putting together EVERY IMAGINABLE PACKAGE DEAL on the Valances (Center Mount Exhaust and Dual Exhaust) and Tips (OEM Style CME tips, Stainless Steel CME Tips, Single Outllet CME Tips, SS Dual Exhaust Tips and finally "Corsa Clones") that I offer

Check it out...

1993-2002 Camaro CME Valance AND Corsa Clones PACKAGE
http://6litereaterdesigns.com/store/...roducts_id=116




1993-2002 Camaro CME Valance AND OEM Style Tips PACKAGE
http://6litereaterdesigns.com/store/...roducts_id=117



1993-2002 Camaro CME Valance AND SINGLE CME Tip PACKAGE
http://6litereaterdesigns.com/store/...roducts_id=118



1993-2002 Camaro CME Valance AND SS CME Tips PACKAGE
http://6litereaterdesigns.com/store/...roducts_id=119



1993-2002 Camaro Dual Exhaust Valance AND Corsa Clones PACKAGE
http://6litereaterdesigns.com/store/...roducts_id=114



1993-2002 Camaro Dual Exhaust Valance AND DE Tips PACKAGE
http://6litereaterdesigns.com/store/...roducts_id=115



NOTE ON THE CORSA CLONES: I can get...

2.5inlet/3.5dual outlets ss tips
3.0inlet/3.5dual outlets ss tips
2.5inlet/4.0dual outlets ss tips
3.0inlet/4.0dual outlets ss tips

All for the same price (for this sale only, price will be different on my site). I was just too tired to add all those options last night. If you want a size different than the 2.5 in and 3.5 out just put it in the note when you check out...

If you're car isn't ready to hit the streets this summer sounding and looking good, don't blame me, I'm doing my part

It took me awhile to get the connections to offer EVERY (good looking) setup out there and I am very proud that I am now able to do it

Basically I have 10 of each valances, once they are gone package deals are over AND Dual Exhaust valances may be going the way of the do-do bird unless I spring for a new mold, we'll see... If you want it, BUY IT NOW, DO NOT WAIT YOU MIGHT REGRET IT

 

I'm down for the dual exhaust valence, but I don't need any tips. I PM'd you.

 

^^Returned

 

dang Mark, I must say I had my doubts... but now that I see the finished product, these setups you made look great!

Especially this one...



Kudo's man!

 

ugh that dual exhaust valence looks amazing, i need to pick one up but dont have the funds right now

 

How much for just the 2.5 in, 3.5 outlet Corsa Clones? Any closer pics of them?

 

They are on my site but are on backorder right now...

 

PM sent!

 

^^Replied... For the benefit of others I was asked about GMMG Wide Ovals and a valance for them...

"My dual exhaust valance will fit them perfectly. My openings are 10", your tips are 6-7/8" so they will take up the same amount of space as you see in my "corsa clones" pictures. They will look HOT !

I only have 5 DE Valances left though so let me know....

Mark"

 

So on what number are you on this?
I might endup jumping into this sale!
So its $700 + plus tax & shipping is already included?
How big is the lip on the CME 3inch tips?

 

Tax and shipping is included. You choose the size you want, 3" or 2.5"...

 

what if I don't want tips?

 

^^Then go to the site and just buy the valance

 

damn. i literally dreamed someone would do this back when i had my z. fan-******-tastic.

i hope this makes you rich. haha

now make a new rear bumper for TAs

 

This is on hold for now...

 

 

^^In other words don't place any orders, I have to check stock, this GP may be over...

 

I will be ordering a VFN hood & I wanted to join this also but I guess it aint going to happen, right?

 

^^We'll see. Trying to get a hold of my vendor is an issue right now so I want to hold off on other orders...

 

PM if this thread comes back up...thxs.