F/S: ARP Head Studs, Racetronix Harness, 7.425" Pushrods, Flexplate, Fuel Regulator

 
Thread Tools
 
Search this Thread
 
Old Jun 8, 2009 | 07:47 PM
  #1  
NXZ28's Avatar
Thread Starter
10 Second Club
iTrader: (45)
 
Joined: Sep 2004
Posts: 611
Likes: 0
From: Richmond Hill, GA
Default F/S: Racetronix Harness, 7.350" Pushrods, Flexplate, Fuel Regulator

I am cleaning out the garage and found a few more items to sell.

ARP 12-Point Pro Series Head Studs for 97-03 LS1 Part Number 234-4110. There is one small nut for the upper stud and two washers that are missing. You can see them in the pics. I called ARP and they stated that I could order them seperately and the cost would be apprx $10. I just never got around to ordering them. These came out of my 427 and have only been torqued once. They have about 1000 miles on them. The motor would never seal around the new engine sleeve so I had to replace the engine. Sold


Racetronix 99-02 LS1 F-Body Plug and Play Fuel Pump Wiring Harness with Pump Booster Interface and Body Ground Kit. It is Part Number RX-F99-FPWHG-2. It is brand new. I bought it a few years ago and never needed it. It has been sitting in my garage for 3 years still in the bag. $55 Shipped





Competition Cams 7.425" Hardened Pushrods. Apprx. 6K miles on them. I went back to stock heads so I don't need them. Sold

Manley 7.35" Hardened Pushrods. I bought these from SLP by mistake. I used them for apprx 3K miles before I realized my mistake. They are in perfect condition. $80 Shipped obo



2002 LS1 Flexplate. I removed it when I upgraded to the TCI Flexplate. It is in perfect condition. The teeth are in perfect condition. $45 Shipped obo


Fuel Pressure Regulator. Brand new in the box. Never been used. I am not sure who makes it. Sold


All prices are obo.

Last edited by NXZ28; Jun 17, 2009 at 08:03 AM. Reason: Update
Old Jun 9, 2009 | 06:57 AM
  #2  
NXZ28's Avatar
Thread Starter
10 Second Club
iTrader: (45)
 
Joined: Sep 2004
Posts: 611
Likes: 0
From: Richmond Hill, GA
Default

Back up top for the morning crew
Old Jun 9, 2009 | 09:05 AM
  #3  
NXZ28's Avatar
Thread Starter
10 Second Club
iTrader: (45)
 
Joined: Sep 2004
Posts: 611
Likes: 0
From: Richmond Hill, GA
Default

Head Studs Sold.
Old Jun 9, 2009 | 03:10 PM
  #4  
Y2K WS6's Avatar
Launching!
iTrader: (33)
 
Joined: Apr 2008
Posts: 262
Likes: 0
From: Weston, WV
Default

are there any numbers or anything on the fuel pressure regulator?
Old Jun 9, 2009 | 08:22 PM
  #5  
NXZ28's Avatar
Thread Starter
10 Second Club
iTrader: (45)
 
Joined: Sep 2004
Posts: 611
Likes: 0
From: Richmond Hill, GA
Default

Nothing. I just looked it over. I has a high pressure fuel guage mounted on it also.
Old Jun 10, 2009 | 07:10 AM
  #6  
NXZ28's Avatar
Thread Starter
10 Second Club
iTrader: (45)
 
Joined: Sep 2004
Posts: 611
Likes: 0
From: Richmond Hill, GA
Default

Back up top for the morning crew.
Old Jun 10, 2009 | 08:28 PM
  #7  
NXZ28's Avatar
Thread Starter
10 Second Club
iTrader: (45)
 
Joined: Sep 2004
Posts: 611
Likes: 0
From: Richmond Hill, GA
Default

Up for the evening crew.
Old Jun 11, 2009 | 04:58 PM
  #8  
NXZ28's Avatar
Thread Starter
10 Second Club
iTrader: (45)
 
Joined: Sep 2004
Posts: 611
Likes: 0
From: Richmond Hill, GA
Default

Lowered prices.
Old Jun 11, 2009 | 07:21 PM
  #9  
caleBot's Avatar
Teching In
iTrader: (4)
 
Joined: Sep 2007
Posts: 31
Likes: 0
Default

What kind of FPR is that?
Old Jun 13, 2009 | 08:52 AM
  #10  
NXZ28's Avatar
Thread Starter
10 Second Club
iTrader: (45)
 
Joined: Sep 2004
Posts: 611
Likes: 0
From: Richmond Hill, GA
Default

Back up top for the weekend
Old Jun 15, 2009 | 09:11 AM
  #11  
NXZ28's Avatar
Thread Starter
10 Second Club
iTrader: (45)
 
Joined: Sep 2004
Posts: 611
Likes: 0
From: Richmond Hill, GA
Default

One more again
Old Jun 15, 2009 | 01:36 PM
  #12  
digitalsolo's Avatar
TECH Fanatic
iTrader: (24)
 
Joined: Mar 2005
Posts: 1,038
Likes: 3
From: Fort Wayne, Indiana
Default

Good seller, thanks for the head studs!
Old Jun 15, 2009 | 03:20 PM
  #13  
NXZ28's Avatar
Thread Starter
10 Second Club
iTrader: (45)
 
Joined: Sep 2004
Posts: 611
Likes: 0
From: Richmond Hill, GA
Default

You are welcome.
Old Jun 16, 2009 | 08:36 AM
  #14  
NXZ28's Avatar
Thread Starter
10 Second Club
iTrader: (45)
 
Joined: Sep 2004
Posts: 611
Likes: 0
From: Richmond Hill, GA
Default

Regulator Sold
Old Jun 17, 2009 | 08:04 AM
  #15  
NXZ28's Avatar
Thread Starter
10 Second Club
iTrader: (45)
 
Joined: Sep 2004
Posts: 611
Likes: 0
From: Richmond Hill, GA
Default

Back up top.
 




All times are GMT -5. The time now is 12:36 AM.