Crane cam new 228/238 .570 114lsa 250.00
used LPE cam LS1-GT2-3 207 / 220 .571" / .578" 1.7 ratio 118.5 200.00 ( SOLD )
bosch 42's 150.00 used
stock crank 100.00
rebuildable ls1 block 100.00
vette oil pans 80.00 each ( 1 LEFT )
used pacesetter f-body headers coated ( well Used ) 100.00 (SOLD )
valley cover,front & rear covers Make offers.
346 short block (used ) newly freshed up JE flat top pistons JE rings,Eagle rods, clevite rod and main bearings, arp main studs, stock crank, fresh hone on cyl. walls, fresh line bore, all bearing clearances set. 1600.00 obo (SOLD )

 

Any thing wrong with the headers

 

how many miles on injecters

 

will you take 100.00 for the injecters

 

The headers have bings and are stained up from oil getting on them. The injectors have 12-14k for miles. and no one the 100.00

 

Post pics of headers? And how are the flanges?

 

PM me some pics i have money inhand ready to send

 

consider the headers sold pm me with payment details

 

Please be specific on what you want pics of plese.

 

headers sold

 

Well I wanted the headers but sold now

 

how many miles on the cam shaft...did it work well with n20? used LPE cam LS1-GT2-3 207 / 220 .571" / .578" 1.7 ratio 118.5 200.00

 

Should work well with nitrous. We had it in a vortec blower car, with 12 psi on meth and a a4 trans it made 623 rwhp and 580 rwtq.

 

how rough is the ls1 block? and what year is the built shortblock from?

 

Thanks, for the call.

 

The bare block is able to be cleaned up and used with 3.905 bore pistons. the short block is a 2000 block.

 

LPE cam is sold ...

 

who did the work on it? any pics? how many miles since the rebuild? part # on pistons? valve reliefs?

 

I did the work on it myself. I have a shop here In the Daytona Beach, Fl area. Many people in the florida forums will give a good word if needed. There are 0 miles on the motor since rebuilding it, went to a 408 set-up and this is just siting here on the stand. Time to give it a new home. Off JE site 194884 347 3.905 3.622 6.098 0.010 1.340 10.6 10.3 9.6 -2.0 430 K 0.005.

 

how many miles on the rotating assembly prior to rebuild? what exactly was replaced? Was it sprayed?