***Drag race parts, rear end, yank pt4400, built trans, brakes, gears and much more!*
Thread Starter
11 Second Club
iTrader: (44)
Joined: Sep 2002
Posts: 1,312
Likes: 3
From: Virginia Beach, VA
***Drag race parts, rear end, yank pt4400, built trans, brakes, gears and much more!* Im going to be adding more parts as this goes along. I don't have the time to list everything today.
The used parts came of a 2000 SS with 64,000 miles. These parts are from the car that currently sits #4 on the stock internal list and holds the stock internal MPH record. prices do not include shipping. The big heavy stuff I would prefer not to ship unless you setup the shipping. I take paypal if you cover the fees.
****** built 10 bolt. I've been 1.44 60ft with this rear. It only has (6) 1/4 mile
passes and (4) 1/8th mile passes.
- New richmond 3.73 gear
- New richmond install kit
- Red line gear oil
- All new bearings and seals
- Braced with chromoly tubing
- Coil over brackets
- Anti-roll brackets
- BMR LCA relocation brackets
- Chromoly tiedown hooks
- painted silver calipers
- has all stock suspension points too
- 4 channel abs
asking $750 complete and ready to go with brakes or $650 without calipers and rotors
****** MSD black plug wires. (10) 1/4 mile passes $55
***** Ls1 rear brakes. painted silver calipers and rotors. prefer to sell these with the rear end $125
***** Ls1 front brakes with spindles, hubs, calipers, abs sensors, rotors. Complete. Calipers are painted silver and spindles painted black. Nice stuff. not rusted junk. $200 for everything.
****** Built 4L60E SOLD
****** Yank PT4400 converter SOLD
****** Richmond 4.10 gear for 10 bolt SOLD
****** 15x8 weld draglites SOLD
****** Burkhart chromoly tie rods SOLD
****** Speed Inc. valve cover breather SOLD
stay tuned for more parts!!
The used parts came of a 2000 SS with 64,000 miles. These parts are from the car that currently sits #4 on the stock internal list and holds the stock internal MPH record. prices do not include shipping. The big heavy stuff I would prefer not to ship unless you setup the shipping. I take paypal if you cover the fees.
****** built 10 bolt. I've been 1.44 60ft with this rear. It only has (6) 1/4 mile
passes and (4) 1/8th mile passes.
- New richmond 3.73 gear
- New richmond install kit
- Red line gear oil
- All new bearings and seals
- Braced with chromoly tubing
- Coil over brackets
- Anti-roll brackets
- BMR LCA relocation brackets
- Chromoly tiedown hooks
- painted silver calipers
- has all stock suspension points too
- 4 channel abs
asking $750 complete and ready to go with brakes or $650 without calipers and rotors
****** MSD black plug wires. (10) 1/4 mile passes $55
***** Ls1 rear brakes. painted silver calipers and rotors. prefer to sell these with the rear end $125
***** Ls1 front brakes with spindles, hubs, calipers, abs sensors, rotors. Complete. Calipers are painted silver and spindles painted black. Nice stuff. not rusted junk. $200 for everything.
****** Built 4L60E SOLD
****** Yank PT4400 converter SOLD
****** Richmond 4.10 gear for 10 bolt SOLD
****** 15x8 weld draglites SOLD
****** Burkhart chromoly tie rods SOLD
****** Speed Inc. valve cover breather SOLD
stay tuned for more parts!!
Last edited by promod1955; Jul 5, 2009 at 12:32 PM.
Trending Topics
Very interested in the rear end (with the calipers and rotors) and trans. If I could work out shipping do you think we could do a ballpark figure of $1300 + shipping for both to 74006 in Oklahoma? If you're interested I will make some calls.