18" Dynomax Bullet 3" In/Out.

 
Thread Tools
 
Search this Thread
 
Old Jul 8, 2009 | 06:41 PM
  #1  
stevo92z28's Avatar
Thread Starter
TECH Apprentice
iTrader: (22)
 
Joined: Sep 2006
Posts: 300
Likes: 0
From: Northern, VA
Default 18" Dynomax Bullet 3" In/Out.

sold.

Last edited by stevo92z28; Sep 28, 2009 at 10:48 PM.
Old Jul 13, 2009 | 10:00 PM
  #2  
miaminick's Avatar
Teching In
 
Joined: Jan 2007
Posts: 47
Likes: 0
From: Miami
Default

HOW LONG IS THE SLP LM II MUFFLER? will this fit as a direct replacement?
Old Jul 20, 2009 | 04:15 PM
  #3  
stevo92z28's Avatar
Thread Starter
TECH Apprentice
iTrader: (22)
 
Joined: Sep 2006
Posts: 300
Likes: 0
From: Northern, VA
Default

I have never had a SLP LM muffler so i'm not quite sure how you want me to answer that. This is an 18" bullet most bullets are 12 or 18" so thats all i can tell you.

Still for sale...
Old Jul 23, 2009 | 03:59 PM
  #4  
stevo92z28's Avatar
Thread Starter
TECH Apprentice
iTrader: (22)
 
Joined: Sep 2006
Posts: 300
Likes: 0
From: Northern, VA
Default

bump.
Old Jul 23, 2009 | 06:57 PM
  #5  
2001z's Avatar
Banned
iTrader: (32)
 
Joined: Mar 2005
Posts: 1,157
Likes: 0
From: Fountain Inn, SC
Default

Is the end open on the ends or just cut off even with the ends? and is it 3in od or id
Old Jul 23, 2009 | 09:24 PM
  #6  
stevo92z28's Avatar
Thread Starter
TECH Apprentice
iTrader: (22)
 
Joined: Sep 2006
Posts: 300
Likes: 0
From: Northern, VA
Default

Its 3" in and out. I don't know if that's ID or OD...and the muffler is cut off at the ends i don't really know what you mean.
Old Jul 23, 2009 | 09:42 PM
  #7  
lazylongboarder's Avatar
TECH Apprentice
iTrader: (2)
 
Joined: Aug 2006
Posts: 397
Likes: 0
Default

I'm sure it's 3'' ID and 4'' OD. Looks like you just cut the 3'' portions (ends) just past the packing.

Free bump. If you got it tomorrow i might take it
Old Sep 28, 2009 | 08:52 PM
  #8  
stevo92z28's Avatar
Thread Starter
TECH Apprentice
iTrader: (22)
 
Joined: Sep 2006
Posts: 300
Likes: 0
From: Northern, VA
Default

sold.

Last edited by stevo92z28; Sep 28, 2009 at 10:48 PM.
 




All times are GMT -5. The time now is 06:08 AM.