Manual brake booster, stainless brake lines, LS1 brakes, SLP front springs & more...
Thread Starter
10 Second Club
iTrader: (16)
Joined: Jan 2006
Posts: 1,013
Likes: 1
From: Wichita Falls, TX
BMR/Strange manual brake booster...NIB, never intalled. SOLD!
Russell stainless steel brake lines...also new. Partially installed, until I figured out I needed different lines with differrent fittings for my drag brakes. You get the 4 corners....frame rails to calipers. SOLD!
SLP front springs....also new, never installed. $80 shipped

Stock LS1 brakes off my '02 SS. Complete with lines. Fronts include spindals, rotors, calipers, hubs, ARP wheel studs, and pads. Rears include rotors, calipers, and pads. SOLD!
Taylor LS1 plug wires with NGK TR6 plugs....used, but in very good shape. SOLD!
Dell Inspiron 1100 laptop...I originally bought it for my FJO controller, but then started using it for the net and it turned out to work very well. Uses Windows XP (I think professional) for an operating system. Still works great, the only issue is the battery will not hold a charge for more than 30 minutes. I'm including a nice case, as well as the charger cord and a wireless card. $200 shipped.
Pics upon request.
Russell stainless steel brake lines...also new. Partially installed, until I figured out I needed different lines with differrent fittings for my drag brakes. You get the 4 corners....frame rails to calipers. SOLD!
SLP front springs....also new, never installed. $80 shipped
Stock LS1 brakes off my '02 SS. Complete with lines. Fronts include spindals, rotors, calipers, hubs, ARP wheel studs, and pads. Rears include rotors, calipers, and pads. SOLD!
Taylor LS1 plug wires with NGK TR6 plugs....used, but in very good shape. SOLD!
Dell Inspiron 1100 laptop...I originally bought it for my FJO controller, but then started using it for the net and it turned out to work very well. Uses Windows XP (I think professional) for an operating system. Still works great, the only issue is the battery will not hold a charge for more than 30 minutes. I'm including a nice case, as well as the charger cord and a wireless card. $200 shipped.
Pics upon request.
Last edited by 02SS:ZEUS; Jul 28, 2009 at 05:21 AM.
Thread Starter
10 Second Club
iTrader: (16)
Joined: Jan 2006
Posts: 1,013
Likes: 1
From: Wichita Falls, TX
Thread Starter
10 Second Club
iTrader: (16)
Joined: Jan 2006
Posts: 1,013
Likes: 1
From: Wichita Falls, TX
Trending Topics
Thread Starter
10 Second Club
iTrader: (16)
Joined: Jan 2006
Posts: 1,013
Likes: 1
From: Wichita Falls, TX
Thread Starter
10 Second Club
iTrader: (16)
Joined: Jan 2006
Posts: 1,013
Likes: 1
From: Wichita Falls, TX
Yes, they are. Rotors aren't warped or anything, and still lots of life on the pads. The rear pads are practically new. The rear calipers have been grinded down a little to accomidate a set of Pro Stars, but I still used spacers, so they didn't get grinded down that much. For an extra $20, I'll sand them all down and put a coat of caliper paint on them if you'd like. I have red, black, and silver.
Yes, they are. Rotors aren't warped or anything, and still lots of life on the pads. The rear pads are practically new. The rear calipers have been grinded down a little to accomidate a set of Pro Stars, but I still used spacers, so they didn't get grinded down that much. For an extra $20, I'll sand them all down and put a coat of caliper paint on them if you'd like. I have red, black, and silver.
Thread Starter
10 Second Club
iTrader: (16)
Joined: Jan 2006
Posts: 1,013
Likes: 1
From: Wichita Falls, TX
Sale pending on brakes and manual brake booster.
For those that made offers, sorry, but I was offered full asking price. I'll keep you posted if it falls through.
For those that made offers, sorry, but I was offered full asking price. I'll keep you posted if it falls through.



