Trickflow 215 CNC heads for sale. $1275 shipped.
Trickflow 215 CNC heads for sale. $1275 shipped. I have a set of TFS 215 heads. One chamber had a 10mm bolt dropped into it and put marks in the chamber.
You can run them as is. Or put two new valves in them, Smooth out the chamber with a dremel and run them as is. Or Send the head to be repaired and pay $300 for a repair and re-cnc on the chamber. Either way, this is dirt cheap for these heads...
There is no major damage, cracks, or issues. They are still runable... If I were going to use them myself, I would put a tiny touch of weld an the deeper impressions and smooth out. Replace the two valves for $40, and run'm...
$1275 Shipped, or trade for something...not sure what, just tell me what you have. Lol.
You can run them as is. Or put two new valves in them, Smooth out the chamber with a dremel and run them as is. Or Send the head to be repaired and pay $300 for a repair and re-cnc on the chamber. Either way, this is dirt cheap for these heads...
There is no major damage, cracks, or issues. They are still runable... If I were going to use them myself, I would put a tiny touch of weld an the deeper impressions and smooth out. Replace the two valves for $40, and run'm...
$1275 Shipped, or trade for something...not sure what, just tell me what you have. Lol.
Last edited by nitrorocket; Aug 20, 2009 at 01:35 AM.
The heads are mint, just the one chamber needs tlc... i dont know the miles, look very low, almost new... they are supposed to never have been milled. Stock cc.
killer deal guys, i wish i needed them!!!
killer deal guys, i wish i needed them!!!
Trending Topics
TECH Fanatic
iTrader: (26)
Joined: Aug 2008
Posts: 1,113
Likes: 0
From: Where our street cars are faster than your racecars..Mississippi
what about any trades ?
check out my for sale thread https://ls1tech.com/forums/lsx-parts...l#post11995565
and i also have alot of car audio (around 5k worth i'm bound to have something you like..lol)
pm me lets talk
check out my for sale thread https://ls1tech.com/forums/lsx-parts...l#post11995565
and i also have alot of car audio (around 5k worth i'm bound to have something you like..lol)
pm me lets talk
This is a killer deal, someone ****** this up!
I just sold my repaired CNC 215's W/the used PR's for 2000$. after throwing a rod pieces of broken piston left one chamber looking similar to his. I also had 5 bent valves. You can get replacement valves from TEA for 12$ each. IF I were the OP I would order 2 new valves and clean the cyl up some and charge even more. this is an easy fix.
I just sold my repaired CNC 215's W/the used PR's for 2000$. after throwing a rod pieces of broken piston left one chamber looking similar to his. I also had 5 bent valves. You can get replacement valves from TEA for 12$ each. IF I were the OP I would order 2 new valves and clean the cyl up some and charge even more. this is an easy fix.
