I still offer the factory modified, factory looking bezels on my site but have always wanted to offer a less expensive waterjet version as well.

I FINALLY got the time and money to get my waterjet guy to design it. It is 1/4" thick so it will sit flush and it textured ABS (black) so it will blend in well (and you can always rattle can it the color of your interior or also paint the smooth side of the ABS body color or something cool).

It is a cheaper option for those who can't afford the almost $200 modified factory bezel but MUCH higher quality than if you tried to do this with a dremel and thinner plastic.

Here's some pics of the piece, pics in a car coming tomorrow...







They will just mount/dis-mount using provided velcro. I'll list them on my site for $100 but anyone reading this I have 10 I'll sell for $75 and that includes shipping and paypal fees.

Just send $75 to madelisle@yahoo.com and put in the note ABS Double DIN

Thanks and hopefully this will help some people out !

 

Got any in car pics yet?

 

^^Unfortunately the car I had lined up to put it in (only Bird I know of around here with a Double DIN) was impounded (parking tickets) and still waiting for release

 

If you're thinking about getting a double din bezel, I'd definitely recommend getting one from Mark not only because it's a great quality product but he'll also do what it takes to make sure that you get a bezel the fits properly. Here's a picture of the last Bezel Mark sent me to replace another one that was sent but was too big for my head unit. Also, my indash unit is an Avic D3 and I did not cut the tray that radio sits on. Thanks again Mark...