Dunlop winter tires and wheels for cheap
Sold the Camaro, have no use for any of this stuff anymore
Winter Wheels and Tires- They are 16 inch wheels that have some Dunlop winter rubber on them. I got around great in them over the past couple of winters. I'd love to get out of them for $325-----Now taking $275 plus shipping


Have ~75% tread left
Winter Wheels and Tires- They are 16 inch wheels that have some Dunlop winter rubber on them. I got around great in them over the past couple of winters. I'd love to get out of them for $325-----Now taking $275 plus shipping


Have ~75% tread left
Last edited by brickonwheels; Nov 30, 2009 at 03:32 PM.
Trending Topics
Bottle heater has been sold. The bracket is meant to go over the hump between the two rear bucket seats.
Here is a link to the kit
http://www.harrisspeedworks.com/prod...cat=137&page=1
Included are:
10 Lb. HSW Nitrous Bottle (Black)
PowerMax 2-Port N2O Solenoid (.125 Orifice)
PowerMax 2-Port Fuel Solenoid (.250 Orifice)
8 Nitrous Jets (75 HP, 100 HP, 125 HP, and 150 HP)
1 HSW Wet Nozzle (Anodized Aluminum)
1 Nozzle Retaining Nut (Anodized Aluminum)
4AN Bottle Nut (Stainless Steel)
1 20” (Inches) Blue S.S. Braided Hose (Solenoid to Nozzle)
1 20” (Inches) Red S.S. Braided Hose (Solenoid to Nozzle)
1 20” (Inches) Red S.S. Braided Hose (Fuel Rail to Solenoid)
16’ (Feet) 4AN S.S. Braided Hose (Main Feed Line)
2 Blue AN to NPT Fittings
2 Red AN to NPT Fittings
1 WOT (Micro) Activation Switch & Bracket
1 40 Amp Relay & Harness
1 HSW Nitrous Pressure Gauge (Mounts directly on Nitrous Bottle)
1 Set of Solenoid Brackets (Hardware Included)
1 Electrical Pack (Wire & all Electrical Connectors (Weather Tight)
I have also added a purge valve
Here is a link to the kit
http://www.harrisspeedworks.com/prod...cat=137&page=1
Included are:
10 Lb. HSW Nitrous Bottle (Black)
PowerMax 2-Port N2O Solenoid (.125 Orifice)
PowerMax 2-Port Fuel Solenoid (.250 Orifice)
8 Nitrous Jets (75 HP, 100 HP, 125 HP, and 150 HP)
1 HSW Wet Nozzle (Anodized Aluminum)
1 Nozzle Retaining Nut (Anodized Aluminum)
4AN Bottle Nut (Stainless Steel)
1 20” (Inches) Blue S.S. Braided Hose (Solenoid to Nozzle)
1 20” (Inches) Red S.S. Braided Hose (Solenoid to Nozzle)
1 20” (Inches) Red S.S. Braided Hose (Fuel Rail to Solenoid)
16’ (Feet) 4AN S.S. Braided Hose (Main Feed Line)
2 Blue AN to NPT Fittings
2 Red AN to NPT Fittings
1 WOT (Micro) Activation Switch & Bracket
1 40 Amp Relay & Harness
1 HSW Nitrous Pressure Gauge (Mounts directly on Nitrous Bottle)
1 Set of Solenoid Brackets (Hardware Included)
1 Electrical Pack (Wire & all Electrical Connectors (Weather Tight)
I have also added a purge valve


