FS CTS-V Brakes

Reply Subscribe

Thread Tools

Search this Thread

Sep 4, 2009 | 02:43 PM

camcamaro1991

Thread Starter

Launching!

iTrader: (18)

Joined: Jan 2006

Posts: 265

Likes: 0

From: DFW

FS CTS-V Brakes

SOLD

located in DFW (Bedford)
Hey guys i going to sell my CTS-V brakes.
this will include
2 front loaded CTS-V calipers (i got them new, they only have about 2,000 miles on them)
they some small scratches on the calipers.
2 correct length Stainless Steel brake lines and F-body adapters (custom lines from ebmiller)
2 C6 Z06 brake rotors (i also got the rotors new as well)
pics are below, and the 3rd pic is them on the car.
SOLD
PM me for additional info...

Last edited by camcamaro1991; Sep 24, 2009 at 05:29 PM.

Sep 4, 2009 | 04:26 PM

2002B4CCamaro

On The Tree

iTrader: (4)

Joined: Jun 2005

Posts: 177

Likes: 0

Super Interseted - What is required to make them work on an F-Body?

Sep 4, 2009 | 04:33 PM

kmgsix08

TECH Apprentice

iTrader: (17)

Joined: Aug 2006

Posts: 366

Likes: 0

From: Ft. Worth, TX

^^that's what i was wondering

Sep 4, 2009 | 04:43 PM

RickyMartinZ28

TECH Fanatic

iTrader: (5)

Joined: May 2007

Posts: 1,374

Likes: 0

From: Tyler, Tx

I think they are pretty much a direct bolton. I think an adapter is needed for the brake line, and that's pretty much all...

I've never done the swap though. It'd be nice.

Sep 4, 2009 | 05:21 PM

camcamaro1991

Thread Starter

Launching!

iTrader: (18)

Joined: Jan 2006

Posts: 265

Likes: 0

From: DFW

Quote:

Originally Posted by 2002B4CCamaro

Super Interseted - What is required to make them work on an F-Body?

it depends on the wheels. i got C5 ZO6 wheels up front and in back.
so with the 18x10.5 and i believe its a 58mm off set.
i used the slightly longer wheel studs(from any autopart stores) and
1/4 spacer and the fit good.
there will be a need for a washer or two inbetween the caliper and kunckle.
and then i fine tuned the rotor with a couple washers just in am very picky.
to get the rotor even between the calipers.
there is a bunch of posts about these brakes on f-bodys.

Sep 5, 2009 | 12:37 AM

SUTTERERMAN85

TECH Fanatic

iTrader: (42)

Joined: Sep 2005

Posts: 1,430

Likes: 2

From: North Fort Worth

I drove his car with these on and they are sick. Crazy stopping power.

Sep 6, 2009 | 07:41 PM

camcamaro1991

Thread Starter

Launching!

iTrader: (18)

Joined: Jan 2006

Posts: 265

Likes: 0

From: DFW

CTS-V brakes for F-Bodys

Quote:

Originally Posted by SUTTERERMAN85

I drove his car with these on and they are sick. Crazy stopping power.

Thanks Bud, it was one hell of let down when i reinstalled my factory brakes, damn car now brakes like a old worn out truck with drum brakes

if anyone else has any questions please fill free to ask or pm me
trust me these brakes make you EAT WINDSHIELD!!!

TT

Trending Topics

Canted valve heads

72

10.4k
5.3 turbo low boost head gasket? Graphite?

10

195
Epic SRK B/S thread of 2019

12.7k

548.9k
1999 SS 1LE (aka. White Privilege)

23

679
88 Fiero Formula LS4/F40 6 speed swap

628

451.7k

Sep 9, 2009 | 12:53 PM

camcamaro1991

Thread Starter

Launching!

iTrader: (18)

Joined: Jan 2006

Posts: 265

Likes: 0

From: DFW

$400 ---obo---

TT
Thanks for looking guys.

Sep 9, 2009 | 01:03 PM

adanieljohnson1

TECH Addict

iTrader: (1)

Joined: Nov 2008

Posts: 2,741

Likes: 1

From: Frisco, TX

Quote:

Originally Posted by camcamaro1991

located in DFW (Bedford)

Hey guys i going to sell my CTS-V brakes.
i dont need them any more
this will include
2 front loaded CTS-V calipers (i got them new, they only have about 2,000 miles on them)
they some small scratches on the calipers.
2 correct length Stainless Steel brake lines and F-body adapters (custom lines from ebmiller)
2 C6 Z06 brake rotors (i also got the rotors new as well)
pics are below, and the 3rd pic is them on the car.
$400.00 OBO + shipping (i prefer pick up)
PM me for additional info...

On the second picture I see 2 lil pins that hold the pads in! What are those called because I need to buy a replacement pin for my front left!