Notices

WTB LS1 Engine Parts

Thread Tools
 
Search this Thread
 
Old Sep 9, 2009 | 08:40 PM
  #1  
Marky522's Avatar
Thread Starter
On The Tree
iTrader: (8)
 
Joined: May 2009
Posts: 199
Likes: 1
Default WTB LS1 Engine Parts

Update.. Forgot to add, willing to trade ANY parts you have that i need for any of my MANY sets of 19" Tires, PM me for info but they range in size from 235/35/19 to 305/30/19

Ok, Im new to this Game... Give me a Porsche and i know it... LOL...

I need the following parts for an Engine out of a 99 Corvette Ls1... I am using a 05 Denali harness and computer that has been flashed, I need the following parts. I am going with the F-body Accessory setup.

Here are my IMMEDIATE needs:
Oil Pressure sensor
Knock Sensor x2
Cam sensor ---Thanks 02gmc5.3
crank sensor ---Thanks 02gmc5.3
Map Sensor---Thanks VIPERKLR
Knock Harness Thanks VIPERKLR
Maf Sensor---Thanks 02gmc5.3
Plug wires to go from truck coils to LS I was told they need to be longer than normal???

I also WILL need the following, but the right deal will move it up...
Starter
Alternator
Water pump
Tensioner
Idler
Main bolts that come in from the side of the block... For some reason the shop i bought the engine from swiped them.



I have Paypal and will Pay immedaitly for the right deal, and i will be straight with anyone. You can check my feedback on both EBay and Rennlist.com Both under the same screen name. Rennlist is a Sister site of LS1Tech.com for Porsche's and i have been a paying member for 8 years, not going to give anyone the run around.
Thanks,
Mark

Last edited by Marky522; Sep 11, 2009 at 09:43 PM.
Reply
Old Sep 10, 2009 | 08:43 AM
  #2  
oange ss's Avatar
TECH Junkie
20 Year Member
iTrader: (50)
 
Joined: Jan 2005
Posts: 3,241
Likes: 6
From: Texas
Default

i think I have the knock sensors
Reply
Old Sep 10, 2009 | 12:23 PM
  #3  
NemeSS's Avatar
TECH Senior Member
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (127)
 
Joined: Sep 2005
Posts: 6,889
Likes: 9
From: Houston,TX
Default

i have wp with tensioner
Reply
Old Sep 10, 2009 | 12:52 PM
  #4  
pt109's Avatar
Teching In
iTrader: (2)
 
Joined: May 2009
Posts: 17
Likes: 0
From: Hatfield, AR
Default Knock Sensors and Wires

I have these.

Pictures at http://hatfield.homelinux.com/lsx_parts.html

Regards,
Ken
Reply
Old Sep 10, 2009 | 01:28 PM
  #5  
oehq's Avatar
FormerVendor
iTrader: (1)
 
Joined: Aug 2009
Posts: 2
Likes: 0
Default

Marky522,
We are OE Parts Headquarters and a new Site sponsor for LS1TECH
The parts you were requesting are listed below and we have them all in stock.

If you click on the links below they should take you to our site and display the parts you are needing our site

The Knock sensor is a 12589867 $47.24
the Oil Pressure sensor is a 12616646 $41.47

the additional parts you might need are

Starter 336-1932 $185.80 with a core price of $38.50
Alternator 334-1280 $275.00 with a core price of $33.00
Water Pump 252-846 $144.28
Tensioner 38194 $79.34
AC Roler Pulley 15-4669 $33.55
Drive Idler Pulley 38006 $19.22

All of theses parts listed are genuine ACDelco parts and IN STOCK
If You order?
Please be sure and use discount code "LS1TECH' this will apply additional discounts to the above pricing.

Thanks again for the opportunity to quote on you parts needs
Reply
Old Sep 10, 2009 | 06:30 PM
  #6  
flewbyyou04r1's Avatar
On The Tree
iTrader: (34)
 
Joined: Oct 2006
Posts: 163
Likes: 0
From: DETROIT, MI
Default

pm sent
Reply
Old Sep 11, 2009 | 09:46 AM
  #7  
sanddperformance's Avatar
Teching In
iTrader: (6)
 
Joined: Oct 2008
Posts: 25
Likes: 0
Default

i should have a set of knock sensors out of a lq4 $45 shipped pm if interested
Reply
Old Sep 11, 2009 | 09:42 PM
  #8  
Marky522's Avatar
Thread Starter
On The Tree
iTrader: (8)
 
Joined: May 2009
Posts: 199
Likes: 1
Default

See update in thread, thanks for the replys..

Mark
Reply
Old Sep 11, 2009 | 09:49 PM
  #9  
oange ss's Avatar
TECH Junkie
20 Year Member
iTrader: (50)
 
Joined: Jan 2005
Posts: 3,241
Likes: 6
From: Texas
Default

have 1 ea. new GM knock sensor and 1 ea slightly used GM sensor
Reply
Old Jan 3, 2010 | 05:34 PM
  #10  
GrannySShifting's Avatar
TECH Junkie
iTrader: (10)
 
Joined: Nov 2001
Posts: 3,944
Likes: 21
From: Glen Burnie, Md
Default

Email me, have most everything else you need
Reply
Old Jan 13, 2010 | 06:58 PM
  #11  
Dmitriy's Avatar
On The Tree
iTrader: (15)
 
Joined: Oct 2006
Posts: 103
Likes: 1
From: Near Seattle, WA
Default

I have these:

Starter
Alternator
Water pump
Tensioner
Idler

I can check on the bolts, do you still need any of them?

I'm @ 98204

Cheers!
Reply




All times are GMT -5. The time now is 05:39 PM.