LS1 Block, 853 Heads, Crankshaft, Pistons

 
Thread Tools
 
Search this Thread
 
Old Sep 10, 2009 | 11:22 AM
  #1  
jham4x4's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Sep 2008
Posts: 5
Likes: 0
From: Kennesaw, Ga
Default LS1 Block, 853 Heads, Crankshaft, Pistons

I'm getting rid of some extra ls1 parts. This is a torn down motor from a 1999 Camaro with about 170K miles on it. A cam lobe went bad and messed up the cam and a couple lifters, nothing else was damaged. The block has been torn down, cleaned and is ready for the machine shop. You can see the cylinders are in great shape with the hatching still visible. The crankshaft is great too, no scratches or marks. The pistons and rods are in good shape one is a little messed up from me cleaning it. But anyone rebuilding the motor would want new pistons anyways. If you want everything I'll make a package deal for you and all prices are OBO. I have more pictures so email me.

Located in Mableton, GA

LS1 block with cam sensor, crank sensor,oil pressure sensor,camshaft cover,front/rear covers, water pump, crank pulley, timing chain -- $200
LS1 crankshaft -- $100
LS1 853 heads with covers/harware -- $75
LS1 rods and pistons -- $25
Attached Thumbnails LS1 Block, 853 Heads, Crankshaft, Pistons-block2.jpg   LS1 Block, 853 Heads, Crankshaft, Pistons-heads2.jpg   LS1 Block, 853 Heads, Crankshaft, Pistons-pistons1.jpg   LS1 Block, 853 Heads, Crankshaft, Pistons-crank1.jpg  
Old Sep 10, 2009 | 04:44 PM
  #2  
miller456's Avatar
TECH Enthusiast
iTrader: (36)
 
Joined: Jul 2007
Posts: 660
Likes: 0
From: Omaha, NE
Default

you dont state but are you willing to ship? VERY interest in the block with goodies for the $200 plus shipping of course
Old Sep 11, 2009 | 08:31 AM
  #3  
jham4x4's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Sep 2008
Posts: 5
Likes: 0
From: Kennesaw, Ga
Default

Never shipped a block before. I'll probably have to build a pallet for it. Let me do some research and get back with you.
Old Sep 11, 2009 | 10:37 AM
  #4  
miller456's Avatar
TECH Enthusiast
iTrader: (36)
 
Joined: Jul 2007
Posts: 660
Likes: 0
From: Omaha, NE
Default

sounds good, thanks
Old Sep 11, 2009 | 08:58 PM
  #5  
Marky522's Avatar
On The Tree
iTrader: (8)
 
Joined: May 2009
Posts: 199
Likes: 1
Default

Any chance you would sell the oil pressure sender seperate?

Mark
Old Sep 11, 2009 | 11:41 PM
  #6  
ajohn302's Avatar
Teching In
iTrader: (5)
 
Joined: Jan 2007
Posts: 13
Likes: 0
Default

100.00 shipped for the crank? thanks
Old Sep 14, 2009 | 03:29 PM
  #7  
jham4x4's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Sep 2008
Posts: 5
Likes: 0
From: Kennesaw, Ga
Default

Miller456 -- Dont really have the means to ship and it would be more than what its worth, because I'd have to crate it up and get some one to pick it up from me.

Mark -- Trying to sell with the block

ajohn302 -- shipping to where?
Old Sep 14, 2009 | 04:18 PM
  #8  
ONEBAD383STROKER's Avatar
Staging Lane
iTrader: (5)
 
Joined: Apr 2007
Posts: 78
Likes: 0
From: Deep South Texas
Default

Can I get pictures of the damaged piston? Very interested.
 




All times are GMT -5. The time now is 06:39 PM.