4.8, 5.3, 5.7, and Corvette Parts For Sale
09-14-2009, 02:43 PM
#1
TECH Fanatic
Thread Starter
iTrader: (25)
Join Date: Dec 2004
Location: Houston, TX
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
4.8, 5.3, 5.7, and Corvette Parts For Sale If you have any questions about anything please feel free to ask.
706 Casting Heads - Cleaned, milled .030, 3 angle valve job. All work was done by USA Racing Engines in south Houston a few months ago and since then the heads have been sitting next to my desk. Has stock '06 truck springs on them right now. I'd like to get SOLD
5.3 LM7 Shortblock - 65k miles, There's 2 missing cap bolts from when previous owner transferred the oil pickup system to an LS1. Motor is still assembled and hasn't been taken apart. I have a stock timing chain/sprocket I'll throw in too. Also, the motor has been cleaned and painted high temp black. SOLD
'97-'98 Corvette LS1 Engine Harness - From what I can tell this is complete, but I'm not familiar with corvette harnesses at all. I can post pictures if needed. SOLD
706 Casting Heads - Cleaned, milled .030, 3 angle valve job. All work was done by USA Racing Engines in south Houston a few months ago and since then the heads have been sitting next to my desk. Has stock '06 truck springs on them right now. I'd like to get SOLD
5.3 LM7 Shortblock - 65k miles, There's 2 missing cap bolts from when previous owner transferred the oil pickup system to an LS1. Motor is still assembled and hasn't been taken apart. I have a stock timing chain/sprocket I'll throw in too. Also, the motor has been cleaned and painted high temp black. SOLD
'97-'98 Corvette LS1 Engine Harness - From what I can tell this is complete, but I'm not familiar with corvette harnesses at all. I can post pictures if needed. SOLD
Last edited by jakebdb56; 10-01-2009 at 02:40 PM.
09-15-2009, 07:16 PM
#6
12 Second Club
Join Date: May 2005
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Well that's going to be a nice little drive.LOL Could you PM or email me some pics and a build sheet if you have one? frated420@inbox.com
Trending Topics
09-30-2009, 02:02 PM
#19
Staging Lane
iTrader: (1)
Join Date: Aug 2009
Location: Houston, tx
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
What size valves are in the heads and what springs?
DOH!! I re-read post. Stock truck springs. What size are the valves?
DOH!! I re-read post. Stock truck springs. What size are the valves?
Last edited by allpro; 09-30-2009 at 02:03 PM. Reason: dumb
09-30-2009, 02:06 PM
#20
TECH Fanatic
Thread Starter
iTrader: (25)
Join Date: Dec 2004
Location: Houston, TX
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Stock.
Chamber 61.15 cc 0.100 0.200 0.300 0.400 0.500 0.550 0.600 Intake 200 cc 63 128 179 210 218 221 226 Exhaust 70 cc 54 93 121 145 163 168 174 Valve Diameter Intake 1.89" Valve Diameter Exhaust 1.55" Part Number 12559852
12561706
btw, the chamber will be about 59cc due to them being milled
Chamber 61.15 cc 0.100 0.200 0.300 0.400 0.500 0.550 0.600 Intake 200 cc 63 128 179 210 218 221 226 Exhaust 70 cc 54 93 121 145 163 168 174 Valve Diameter Intake 1.89" Valve Diameter Exhaust 1.55" Part Number 12559852
12561706
btw, the chamber will be about 59cc due to them being milled