garage sale/ shop cleaning - tons of parts
Thread Starter
Closed ex-Sponsor Account
iTrader: (263)
Joined: Apr 2008
Posts: 250
Likes: 1
From: Woodstock, IL
garage sale/ shop cleaning - tons of parts Alright well just sold the 408 and now i am going to be going another route with the car so i am selling off all the parts i have laying around.
- TCI Th400 converter 5000 stall 8" #251410 like new about 1000 miles and 20 passes behind a cam only ls1 $550 shipped link to jegs http://www.jegs.com/i/TCI/890/251410/10002/-1 cost me $1300 new. built for 6 second cars lol, i also have the adapter to adapt to ls1 flexpate.
- Custom cam - Made 677HP on engine dyno with ported l92's (opened up for bore) on a 427 Darton sleeved LS6. Had awesome low speed characteristics and ran like a monster up top! Less than 200 miles on motor. specs - Comp Cams LSK Lobes 2132R/2133R 112+2 247/251 656/660 $275 shipped
- Ls7 exhaust manifolds, stainless, like new and flow amazing, great upgrade over stock manifolds $200 shipped
- Truck intake with all lines, bolts, sensors, fuel rails and injectors $60 shipped
- Truck fuel rails and injectors $25 shipped
- Ls1 head plate, red anodized with stainless allen head bolts $40 shipped
- Truck oil pan and pickup $50 shipped
- ATI Super Damper, like new about 500 miles SOLD
- TCI Flexplate, like new about 500 miles SOLD
- brand new poly motor mounts already installed in clam shells SOLD
- Comp cams chromoly 7.350 pushrods, like new SOLD
- Stock motor mounts, clamshells, stands and bolts SOLD
- Ls1 intake, super nice and clean with fuel rails and injectors SOLD
- Thunder Racing ported ls6 oil pump about 500 miles SOLD
- Manley True Dual roller timing chain 9 way adjustable about 500 miles SOLD
- SLP Smooth Bellow SOLD
- Ported and Polished LS2 TB and harness SOLD
- 6 speed pedal setup with all electronics as well SOLD
I will be posting a ton more parts here shortly.
- TCI Th400 converter 5000 stall 8" #251410 like new about 1000 miles and 20 passes behind a cam only ls1 $550 shipped link to jegs http://www.jegs.com/i/TCI/890/251410/10002/-1 cost me $1300 new. built for 6 second cars lol, i also have the adapter to adapt to ls1 flexpate.
- Custom cam - Made 677HP on engine dyno with ported l92's (opened up for bore) on a 427 Darton sleeved LS6. Had awesome low speed characteristics and ran like a monster up top! Less than 200 miles on motor. specs - Comp Cams LSK Lobes 2132R/2133R 112+2 247/251 656/660 $275 shipped
- Ls7 exhaust manifolds, stainless, like new and flow amazing, great upgrade over stock manifolds $200 shipped
- Truck intake with all lines, bolts, sensors, fuel rails and injectors $60 shipped
- Truck fuel rails and injectors $25 shipped
- Ls1 head plate, red anodized with stainless allen head bolts $40 shipped
- Truck oil pan and pickup $50 shipped
- ATI Super Damper, like new about 500 miles SOLD
- TCI Flexplate, like new about 500 miles SOLD
- brand new poly motor mounts already installed in clam shells SOLD
- Comp cams chromoly 7.350 pushrods, like new SOLD
- Stock motor mounts, clamshells, stands and bolts SOLD
- Ls1 intake, super nice and clean with fuel rails and injectors SOLD
- Thunder Racing ported ls6 oil pump about 500 miles SOLD
- Manley True Dual roller timing chain 9 way adjustable about 500 miles SOLD
- SLP Smooth Bellow SOLD
- Ported and Polished LS2 TB and harness SOLD
- 6 speed pedal setup with all electronics as well SOLD
I will be posting a ton more parts here shortly.
Last edited by 408trans_am; Oct 19, 2009 at 10:18 PM.
Thread Starter
Closed ex-Sponsor Account
iTrader: (263)
Joined: Apr 2008
Posts: 250
Likes: 1
From: Woodstock, IL
Trending Topics
Thread Starter
Closed ex-Sponsor Account
iTrader: (263)
Joined: Apr 2008
Posts: 250
Likes: 1
From: Woodstock, IL
At the moment no its not, although you can buy the a/c pulley for something like 50 to 80 IIRC or you can bolt on a supercharger pulley too.
But its just the normal accessory drive right now.
heres a better pic of it from the side
But its just the normal accessory drive right now.
heres a better pic of it from the side
