basically what you get is calipers(LS1 Fbody), corvette caliper brackets, caliper bracket adapter, and modified spindles with out hubs. you need a few bolts and new rotors as i trashed the others. here is the link.

https://ls1tech.com/forums/texas-cla...ke-set-up.html

$140

 

bump...

 

up again

 

this is the complete set up? no other parts needed? the calipers are ls1 or vettes? if you still have them give me a call, if you would i`m looking for this setup for my 96 ta if you look on the chassis and brake section of this site.
803-983-3321