Injectors, Nitrous plate, Opti...
Thread Starter
TECH Enthusiast
iTrader: (8)
Joined: May 2007
Posts: 605
Likes: 0
From: Statesboro, Georgia
Injectors, Nitrous plate, Opti... I am swapping to carb guys, selling off a few parts..
Vented opti - SOLD (car is pulled apart, has been for over a year... ran great before torn down. brand new MSD cap/rotor loctited)
Accel 30lb injectors - SOLD (buddy needed my 36lb cobalts, swapped. injectors have less than 4000 miles)
Nitrous Outlet monoblade plate/jets - SOLD (sprayed twice on my car, hard hitting ****, awesome quality)
Aeromotive A1000 - 175.00 shipped (pump functions flawlessly. includes pre-filter (aeromotive)
Modified fuel rails - 30.00 shipped (not AN fittings, NPT fittings. when my fuel system was plumbed, used hydraulic hose with ends crimped for cost)
Melling M99hvs - 30.00 shipped (includes press in screen, brand new in box. some prefer this pump, some do not. have to slightly trim factory windage tray to fit. high psi/high volume)
stock throttle body - SOLD (has an air foil, ports front and back have been hogged out. (not blade area) throttle body works great, comes with all functioning sensors. not the prettiest, but it works... used for a while before the monoblade)
i wont have pics up until saturday or so, but if you are interested you may pm or email me. SLawson86@yahoo.com hopefully someone on here will vouch for me! priced including shipping. (i will hold the cash on the opti to ensure it is in working condition upon arrival) thanks in advance guys!
Vented opti - SOLD (car is pulled apart, has been for over a year... ran great before torn down. brand new MSD cap/rotor loctited)
Accel 30lb injectors - SOLD (buddy needed my 36lb cobalts, swapped. injectors have less than 4000 miles)
Nitrous Outlet monoblade plate/jets - SOLD (sprayed twice on my car, hard hitting ****, awesome quality)
Aeromotive A1000 - 175.00 shipped (pump functions flawlessly. includes pre-filter (aeromotive)
Modified fuel rails - 30.00 shipped (not AN fittings, NPT fittings. when my fuel system was plumbed, used hydraulic hose with ends crimped for cost)
Melling M99hvs - 30.00 shipped (includes press in screen, brand new in box. some prefer this pump, some do not. have to slightly trim factory windage tray to fit. high psi/high volume)
stock throttle body - SOLD (has an air foil, ports front and back have been hogged out. (not blade area) throttle body works great, comes with all functioning sensors. not the prettiest, but it works... used for a while before the monoblade)
i wont have pics up until saturday or so, but if you are interested you may pm or email me. SLawson86@yahoo.com hopefully someone on here will vouch for me! priced including shipping. (i will hold the cash on the opti to ensure it is in working condition upon arrival) thanks in advance guys!
Last edited by SLawson86; Nov 30, 2009 at 08:43 AM.
opti do you have any idea how many miles are on the opti? do you take paypal?
you can email me at shoeboxchevy@hotmail.com.
Thanks
you can email me at shoeboxchevy@hotmail.com.
Thanks
Teching In
Joined: May 2007
Posts: 28
Likes: 0
From: wichita, ks and tulsa,ok
would you trade injectors and opti spark for a set of new (just used to mock up new engine build) canton lt1 valave cover and never used canton dip stick? 316-641-7591 Lance
http://<a href="http://s231.photobuc...tobucket"></a>
http://<a href="http://s231.photobuc...tobucket"></a>
Trending Topics
Thread Starter
TECH Enthusiast
iTrader: (8)
Joined: May 2007
Posts: 605
Likes: 0
From: Statesboro, Georgia
I will have pics of the parts up monday morning. i work/live about 50 miles from the shop so i cant get there until tomorrow morning.
-opti has 80,xxx miles on it... not sure exact mileage. Has a brand new, never run MSD cap/rotor installed. inside had no corrosion when torn apart. like i stated up there, i am a man of my word, if this distributor does not work i will give back a full refund +paypal fees.
-Thanks for the trade offers, but i have new canton rocker covers
i would be interested in trading for a holley base carb 750dp with mechanical secondaries, victor jr or weiand team g on a sbc pattern.
paypal info is SLawson86@yahoo.com
if you guys need to get in touch with me, feel free to text or call my cell. 912-398-1965
i wont be by a computer much this weekend. thanks in advance!
-opti has 80,xxx miles on it... not sure exact mileage. Has a brand new, never run MSD cap/rotor installed. inside had no corrosion when torn apart. like i stated up there, i am a man of my word, if this distributor does not work i will give back a full refund +paypal fees.
-Thanks for the trade offers, but i have new canton rocker covers
i would be interested in trading for a holley base carb 750dp with mechanical secondaries, victor jr or weiand team g on a sbc pattern. paypal info is SLawson86@yahoo.com
if you guys need to get in touch with me, feel free to text or call my cell. 912-398-1965
i wont be by a computer much this weekend. thanks in advance!
