FS/FT LS1 parts FORGED PISTONS; RODS; RODS; ARP 2000 ROD BOLTS
FS/FT LS1 parts FORGED PISTONS; RODS; RODS; ARP 2000 ROD BOLTS Category: Racing Parts
Price: $1
Part Fits: 93-02 Pontiac Firebird
Location (State): TX
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6, Small Block
LS Engine?: Non-LS Part
I am asking $550 plus shipping for all of this. I will be taking offers for feel free to PM me any offers. SOLD
I have new rod bearings with stock specs. I am asking for 50 including shipping.
I have 2 pairs of heads. One is a 241 set and the other is a 853 set. SOLD.
LS1 Rear Cover GM part no: 12559287 I am asking 20 obo plus shipping.
I have stock lifter trays and I am asking for $15 plus shipping for all of them. Feel free to make me offers.
Stock rocker arms, stands, and bolts 65 OBO shipped.
Stock pushrods 40 shipped.
Stock oil pump 30 shipped.
Valley cover with gasket 20 shipped. SOLD
stock pistons and rods with bolts. 50 bucks shipped. 1 rod is bad. SOLD
timing chain 40 shipped
I am willing to trade some of this stuff plus cash of my part or your part. Depends what you want to trade. Parts im interested are
LS6 intake
FAST intake
Cam with 23x durations
335/35/17 tires
Nitrous kits
aftermarket valvetrain stuff
-Bert
Last edited by 99bluehawk; Jun 28, 2010 at 06:10 PM. Reason: sold some parts
i bought this from lingenfelter and have less than 1000 miles. I spun 2 rod bearings and might need to replace 2 connecting rods. The rods are 6.125 size and have arp 2000 bolts. I got the rods off ebay. Here are the specs for the pistons off lingenfelter. I bought them for over $650 and that was without the rods and arp 2000 bolts. Part Number: LS1314898I16
Bore: 3.898
stroke: 3.622
rod length: 6.125
dome volume: -16 cc
pin diameter: .927
compression height: 1.314
the mahle powerpak is a complete, race proven piston assembly kit composed of hand deburred, forged, performance coated pistons, high quality steel pins, round wire locks and low drag performance rings. Lingenfelter uses mahle forged pistons in many of our proven engine packages and highly recommend them for their strength and high quality grafal coating.
Features:
Forged aluminum pistons
cnc machined crown
hand deburred finishing
forced pin oiling with machined drain backs
lightweight slipper skirt forgings
cnc finished pin bores
race proven reliable round wire locks
pre-fitted german steel high strength pins
mahle's ultra flat ring grooves and low drag rings for improved sealing
improved coating for less friction
the piston skirts on mahle pistons are coated with grafal by mahle. This coating helps to reduce friction, increase scuffing resistance while improving durability and enable a closer fitting piston to wall clearance for significantly lower engine noise.
I am asking $550 plus shipping for all of this. I will be taking offers for feel free to pm me any offers.
i have new rod bearings with stock specs. I am asking for 50 including shipping.
-bert
Bore: 3.898
stroke: 3.622
rod length: 6.125
dome volume: -16 cc
pin diameter: .927
compression height: 1.314
the mahle powerpak is a complete, race proven piston assembly kit composed of hand deburred, forged, performance coated pistons, high quality steel pins, round wire locks and low drag performance rings. Lingenfelter uses mahle forged pistons in many of our proven engine packages and highly recommend them for their strength and high quality grafal coating.
Features:
Forged aluminum pistons
cnc machined crown
hand deburred finishing
forced pin oiling with machined drain backs
lightweight slipper skirt forgings
cnc finished pin bores
race proven reliable round wire locks
pre-fitted german steel high strength pins
mahle's ultra flat ring grooves and low drag rings for improved sealing
improved coating for less friction
the piston skirts on mahle pistons are coated with grafal by mahle. This coating helps to reduce friction, increase scuffing resistance while improving durability and enable a closer fitting piston to wall clearance for significantly lower engine noise.
I am asking $550 plus shipping for all of this. I will be taking offers for feel free to pm me any offers.
i have new rod bearings with stock specs. I am asking for 50 including shipping.
-bert
Last edited by 99bluehawk; Dec 11, 2009 at 08:44 PM.
