Trick Flow 205CNC heads Bought through TEA $1850 Shipped (plus paypal fees)
Only on car for 1000miles. Broke a ring land on #7 and bent intake and exhaust valves. TEA check them out and put two new valves in the head and surfaced them to make sure they were straight.
http://www.summitracing.com/parts/TFS-3050T001-C00/

Trick FLow Stage 4 Camshaft $270 Shipped
238-242 .595/.595 In car for $1000 miles
http://www.summitracing.com/parts/TFS-30602004/

6.0L block Std. Bore perfect for a 408. $450 picked up

6.0 Crank No issues no scratches or grooves. $150 picked up

Lucas 42# fuel injectors--SOLD- Thanks 68bluebird


Stock Timing Cover $35shipped


Stock Throttle Body Has chip from a TNT nitrous ring in the lip$35 Shipped


Stock Throttle BOdy that has been mildly ported and polishedSOLD


Knock Senser Harness$15 Shipped


1 Sets Stock Lifters $40 shipped


Stock timing Set $25 shipped


Stock LS1 Lifter Trays SOLD


Stock Spark Plug Wires with Heat Shields[B]SOLDB]


Stock pushrods $15 shipped


Stock 99 Fuel Injectors SOLD



Cam Retainer Plate SOLD


Power Steering Cooler $25 shipped


Stock Rocker Arms with Pedestals SOLD- thanks 1badassz
]

These are the OEM wheels on my Yukon. THey are mounted and balaced with TPMS sensers in them.
ZERO curb rash on them.
These are the high polished wheels.

Tires are all roughly 6/32 of tread.
No vibrations up to the 100mph limiter.

These should fit any GM 6 lug truck.
Will fit any 07 up Truck or SUV for sure.

$1000 Picked up

 

bump....

 

bump for today.

 

PM sent on a set of lifters and trays.

 

What springs are on the heads? Have they been surfaced milled?

 

The springs that are on them are considered the Trick Flow Platnium springs. That is what TEA reccommended for what I had. I am not sure who makes the springs for Trick Flow.
They have not been "milled" they had a very small cut to check the surface. They said they only took about a thousandth off.

 

Any pics? Titanium retainers? Why are you selling them any way? I know,101 questions,but thats alot of money in my world. Need lots of info. It's a free bump to the top for you too!

 

I will get some pics. Yes they have Ti retainers. I am selling to get a set of the trickflow 235's im going to a larger engine.

 

What combo were they on and what kind of power did it make? Or track times. You building a 400+cubic inch motor? Any flow info on the heads?

 

I nerver had enought ime with them on the car for good track times or dyno numbers.
The best i made was 380 on a mustang dyno. But i had a dead cylinder in #4 so that was on 7 cylinders. I was having alot of tuning issues.

They flow right at 300 at .600

 

58cc chambers right? Check your pm's

 

Yeah 58 cc