Lunati Billet 6.125 Rods
Thread Starter
LS1TECH Sponsor
iTrader: (25)
Joined: Aug 2004
Posts: 282
Likes: 0
From: Bowling Green, Ky
Lunati Billet 6.125 Rods Lunati Pro Billet 6.125 connecting rods,
Product Description
Connecting rods receive some of the highest stress levels of any bottom end engine component. The forces a rod receives when the piston direction reverses from top dead center can exceed 12,000 lbs. in a race application. When you stop and think about how much stress that is, you realize how important a quality connecting rod is for your race engine. Lunati's fully machined I-beam connecting rods are on average, stronger and lighter than competitor's steel connecting rods. Each set is weight matched to +/- 1.5 grams and utilize ARP® cap hardware, providing you with a top of the line connecting rod that can handle most anything you can throw at it.
Lunati fully machined 4340 forged steel I-beam connecting rod set for Chevrolet small block LS1, LS2, LS6 applications
Rod Length: 6.125 in.
Big End Diameter: 2.100 in.
Small End Diameter: 0.928 in.
Weight: 609 grams
Part Number: 6125FM3
Jobber Price: $1,458.42
Asking 800.00 shipped in the 48.
Rods are in perfect condition. New rules allow aluminum rods so I need to move these. Never had bearing failure etc.
Product Description
Connecting rods receive some of the highest stress levels of any bottom end engine component. The forces a rod receives when the piston direction reverses from top dead center can exceed 12,000 lbs. in a race application. When you stop and think about how much stress that is, you realize how important a quality connecting rod is for your race engine. Lunati's fully machined I-beam connecting rods are on average, stronger and lighter than competitor's steel connecting rods. Each set is weight matched to +/- 1.5 grams and utilize ARP® cap hardware, providing you with a top of the line connecting rod that can handle most anything you can throw at it.
Lunati fully machined 4340 forged steel I-beam connecting rod set for Chevrolet small block LS1, LS2, LS6 applications
Rod Length: 6.125 in.
Big End Diameter: 2.100 in.
Small End Diameter: 0.928 in.
Weight: 609 grams
Part Number: 6125FM3
Jobber Price: $1,458.42
Asking 800.00 shipped in the 48.
Rods are in perfect condition. New rules allow aluminum rods so I need to move these. Never had bearing failure etc.
