Category: Racing Parts
Price: $1
Location (State): OH
Item Condition: Used
Engine: LS1/LS6

Maken some changes and cleaning out the garage.

FI-88X Race Turbo 1.4AR Powdercoated black. This is new and has never been mounted. We actually bought two and only ran one of the cars in this race series. It comes with a -4 inlet and a -10 drain and a 3.5"-4" silicone coupler.
$1500

Rossler 210/4L80E and Midwest Racing Converter This is the baddest of the bad 4L80E's built. This is the one I went 7's with. It has everything done to it that Rossler can do plus a 210 gear set. Fully electronic! The converter is a custom piece that uses our racing converter with a lockup clutch. Both have just been gone thru and are like new.
$4,500

98-00 WS6 Wheels These are in very good condition. Only a little rub on a couple of them. There are two Goodyear Eagle F1 tires 275/40Z R17 mounted. These have very few miles on them.
$500

Pushrods 5/16 x .083 7.00 long with .040 restrictors. These were used with T&D rockers.
$50

Magnafuel Swivel Head Pro Star EFI- 600 This has been used for a couple years but works great. Comes with -10 inlet and outlet fittings.
SOLD

Magnafuel Swivel Head Pro Star EFI-750 This has been used for a couple years but works great. Comes with -10 inlet and outlet fittings.
SOLD

(8)Bosch 160lb injectors Low imp. These were flowed and cleaned by Precision Turbo. Haven't been ran since.
SOLD

Comp/ T&D Rocker Arms 1.7 ratio These have very little run time.
SOLD

LS2 Waterpump Think it came off a crate motor. It still has the caps on the heater ports. I bought it awhile back as a spare.
SOLD



-All items are OBO and do not include shipping.
-If you want pics give me your email.

 

To the top.

 

Back up...

 

Pics and details on rockers please... PMd my email addy.

J

 

You say "race turbo", is there any reason I couldn't run that on a street/strip car? Thanks

 

tranny have a transbrake? how many passes/miles converter stall?

 

^^ what size stall? multi-disk? Anything that would stop a stock reprogrammed pcm from controlling it?

 

Not at all. It has the race cover on it. Plus a large AR exhaust housing. I wouldn't run it on anything smaller than a 408. Or Forced Inductions may work a trade for a smaller AR housing since this is new.

 

Yes it has the PRO brake in it. The trans and converter have been rebuilt and have not been back in a vehicle.

 

It's around mid to high 3,000 stall. But is tight for a turbo car. I can have the stall loosend for next to nothing if needed. I ran this on a 427 with a 101mm turbo. It has a big single disk and locks up perfectly under power even. A stock computer will control it. It functions like a stock trany.

 

Yea I'd probably have to work something out with them. My particular application consists of 281 cubic inches of misery lol

 

what do you mean by a pro brake?

 

Rossler offers 2 different brakes. When he first designed it was a little to slow and I told him it was killing my reaction times. So he developed the Pro brake which is much faster.

 

can u email me pics of the wheels joshjuniorr@gmail.com

 

You have mail.

 

Lowered some prices.

 

what kind of results did you have with that turbo?

 

This one has never been ran. With the other one we had we went 5.30's with it. With very few times out with it. We only had one series that required this turbo.

 

http://cgi.ebay.com/ebaymotors/ws/eB...category=43957

not that it helps but these are the style ive been hunting down

 

Those are 01-02 WS6 wheels.