Category: Audio/Video/Electronics
Price: $0
Part Fits: 93-02 Chevrolet Camaro
Location (State): NY
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6

Can get pics upon request Very close offers will not be refused.. If anyone has a WORKING stock rear i can trade something from here for it prices not shipped but pm me we can work something out

ALL PARTS ARE FROM A 2002 z28 With 14xxx miles on it. ALL is VERY CLEAN



Like new Pst Driveshaft with 2k miles on it. It has 1350 U joints and viper splines it was used on a 12 bolt rear which im pretty sure is the same as a 9inch... Still have receipt so u can warranty it.. 300$

Spohn adjustable trans mount tq arm for 12bolt (can be made for a stock rear or 9inch just order a new 40$ mount from spohn) 250$

TTP ported afr mongoose 205's car dynoed 475 with these heads and a shitty exhaust with a fast 90/90. Clean and ready to be used (had a slight touch up from a machine shop on 1 cylinder due to a ring land detonating) not deep at all and it will carbon up after use like nothing is there... completely assembled with valves 2000$

TTP Punisher cam(used with the above setup) 250$ sounds SICK

thunder racing 7.4 hardened pushrods 120$

buy the complete heads, cam and pushrod setup for 2200 Guaranteed to make 475 hp thru an m6 on a stock bottom end or very close to depending on your car...



Complete STock shortblock with 14k on entire motor! with 1 damaged cylinder needs a bore. would be nice to throw a new set of pistons in and have a FRESH motor 550$


I ALSO have ALOT of accesories and anything that would not be included in roller with a full interior will be for sale.... PM ME

The roller will also be for sale when i get a stock rear for it. IT is the CLEANEST car around. it still smells new and HAS 0 marks on the entire interior LOOKS BRAND NEW although not for sale yet if someones interested they can come look at it and get a rear in it faster so it rolls and will sell

 

you have a PM

 

u have a pm fro me

 

Pm sent

 

BUMP make offers we can talk..

 

60 shipped for the lid and filter and u can consider it sold?

 

pleez send pics of lid to texhotrod5938@aol.com thanx

 

you have a pm

 

Bump!

 

more info on the TA

what makes it "for a 12bolt"? and why would a front bushing change that?

pictures? color? condition?

 

ill go 70 shipped on lid!

 

lid is sold to me. i have already sent the money

 

Do u havew power steerin g pulley snd tbhe intaske to purge solenoid hose?

 

PM sent.