Category: Racing Parts
Price: $0
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO
Location (State): CA
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6

I need to sell some parts to make room for a new project. All prices do not include shipping or Paypal fees.

Ls2 block fresh from machine shop 4.030 bore and has been drilled and tapped for 1/2" head studs. (Head studs are included) New cam bearings are installed SOLD to camaro j

Diamond custom pistons 4.030 bore 4.00 stroke +10cc dome top ring is down .300. These cost $900 new. These are still NIB SOLD to camaro j

Lunati pro mod 6.125 rods. used in great shape SOLD

250 266 @ .050 cam, I will give full specs if interested $200

268 278 @ .050 Solid roller cam, I will give full specs if interested NIB $300

LS2 timing cover SOLD to we_todd_did

LS1 oil pan, pick up ube, and windage tray SOLD to imajeenyas

I will be adding more to this thread as time goes on.

Pics will be sent on request.

Thank you

 

What was the approximate compression you were planning on running with the pistons? Were you going to be using nitrous?
Thanks

 

Depending on head gaskets it would be 14:1 with a 62cc head and 12.6:1 with a 70cc head.

Yes, I was planning on running ALOT of nitrous.

 

Thanks for the reply,
are pics available?

 

Sent you a PM. I am interested in teh Timing chain set, Block, rods and head gaskets

Who did the machine work BTW?

 

As soon as I get to the shop I can get you some pics. Whats your email?

 

Hi tech Machine did the work

 

Thanks,
davehounsell@hotmail.com

 

What are the full Specs on the solid roller cam it might just be what im looking for for my 442 build.

Thanks

 

They are 268 278 @ .050 .702 .705 on a 114 Comp grind

 

Sorry i should have specified i need the following

0.006 duration spec and center line the PTV is critical with this build

What comp lobe series is it ground on?

 

Ok, I will find the cam sheet and let you know.

 

t t t t

 

shoot me a pm with price and pics of the timing chain, (what is the pn?) and timing cover.

 

rings?
part # please,i need some
mike

 

That stuff is not for sale until the block sells. I will let you know.

I dont have any rings for sale.

 

i am under the gun for time.i need rods 800+ asap.if you know of any,
mike

 

Lunati pro mod 6.125 rods. used in great shape $450

 

what crank are they for....??

 

Any ls1 crank, stock or stroker.