Turbo parts/ setup
Turbo parts/ setup Category: Engine - Power Adders
Price: $0
Location (State): IL
Item Condition: Used
Engine: LT1/LT4
tial 44mm wastegate-vband- NEW $250
tial 50 mm blow off valve- USED $150
32x12x3 a2a intercooler - NEW WITH-
3" polished alunimum intercooler piping w/ couplers and clamps-NEW $300
AEM eugo wideband gauge w/ 02- SLIGHTLY USED $150
autometer vacuum/boost gauge $40
mototron 60 lb high impedance injectors (works with stock pcm) $250
aeromotive boost referenced fuel pressure regulator w/ gauge for lt1 $100
if you have an lt1/4 or a sbc i have a custom fabricated hotside that consists of 1 3/4" primary headers, with a 2.5 inch crossover pipe with a t6 flange and vband flange for the wastegate. it is set up so the turbo sits directly in front and center of the motor. VERY NICE SETUP! pm me for pics if i dont have them up yet.
if you use this hotside, you need a different verticle mount radiator to allow room for the turbo. i have a griffin fabd aluminum radiator that will stand vertically and allow room. that is also for sale and is brand new. also the abs unit must be deleted and i have a wilwood prop valve for that as well, also for sale
HOTSIDE PICS
-
https://ls1tech.com/forums/attachmen...=1267496393ale.
https://ls1tech.com/forums/attachmen...1&d=1267496393
PRICES ARE NEGOTIABLE SO PM ME WITH AN OFFER
Last edited by 95firehawklt1; Mar 8, 2010 at 05:39 PM.
Trending Topics
Hey sorry guys i havnt even been checking the replies on my posts, ive been doing all my pm's first. please pm me to get a quicker response but im working right now on replying to all of your posts
