Category: Engine - Power Adders
Price: $0
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): IL
Item Condition: Used
Engine: LS1/LS6, Small Block
LS Engine?: Fits LS Engine

ATI Tree Master Torque Converter for TH400 (this is the converter many people were setting records with). Setup to handle a trans brake and whatever you can throw at it, this is a heavy duty top quality piece. Stalled around 4000 on a 700WHP procharger car. Used for minimal street driving and a couple months at the track. $600



SALE PENDING Yella Terra 1.7 6645 non-adjustable rockers new in the box still. $400 shipped



SALE PENDING 60 LB Siemens Decka Injectors $360 SHIPPED BRAND SPANKING NEW


SALE PENDING ATI Procharger D1SC BRAND NEW IN ALL THE PLASTIC BAGS STILL kit for 98-02 F-Body, upgraded to 8 rib belt setup, upgraded polished aluminum intake box, upgraded 4.5" intercoolers, stock spec pulley is mounted on the blower (6-8 PSI on a stock motor) and also have a 3.55" pulley meant to almost max the blower. Mathcing belts for both pulleys included. NEW IN BOX $5250 SHIPPED

Pics of procharger parts to show they are truly new and still in the wrappers.
http://i1028.photobucket.com/albums/...9/P4270068.jpg
http://i1028.photobucket.com/albums/...9/P4270069.jpg
http://i1028.photobucket.com/albums/...9/P4270071.jpg
http://i1028.photobucket.com/albums/...9/P4270070.jpg
http://i1028.photobucket.com/albums/...9/P4270072.jpg
http://i1028.photobucket.com/albums/...9/P4270078.jpg
http://i1028.photobucket.com/albums/...9/P4270083.jpg
http://i1028.photobucket.com/albums/...9/P4270085.jpg
http://i1028.photobucket.com/albums/...9/P4270087.jpg


SALE PENDING Exotic Performance Plus Blower Cam 232/240 .595/.608 115 lobe separation, installed never ran $350



SOLD "Cadillac Racing" GMPP 88958689 lifters soaked in oil, never ran, $225


SOLD317 heads, not ported, 921 Comp Cams springs. $350 SHIPPED


SOLD B&M pro ratchet shifter for th400/350 NEW IN BOX $175


SOLD ATI Harmonic Dampner (nescessary for procharger 8 rib upgrade) W/ AC Pulley and 10% underdriven. (center hub put on crank, but the rest of the balancer was never assembled, never ran) $425


SOLDKooks Long Tubes, 1 7/8” 4th Gen Camaro/Firebird (newer style with second O2 port for a wide band sensor) NEW IN BOX $795-SHIPPED


SOLD SPEED INC 370 BOOST MOTOR LQ4/9 Iron Block .030 over, stock crank, Eagle Rods w/ ARP L19 bolts, diamond pistons -14.9cc dished, ARP main studs. (same shortblock LS1 speed ran in their 8 second shop car, but I upgraded the rod bolts to be extra safe) NEVER RUN $3200 (LOCAL PICKUP IN CHICAGO FOR THIS ITEM ONLY)


SOLD SLP Double Roller Timing Chain – Mounted on motor never ran, SLP Oil Pump, high volume pressure spring installed, mounted never ran $300 for both


SOLD Greg Weld race star skinnies for the front, never mounted, with lugs $220 NEW IN BOX

SOLD Th400 crossmember Yank Racing mounts with stock style clamshell? for torque arm $165 SHIPPED YC-103 NEW IN BOX

 

bottom dollar on cam

 

That is an awesome price on that cam. You should buy it before someone else does. That cam is hard to come by these days.

 

pm sent

 

Up top

 

is that cam streetable? If i run that cam in the LQ4 will i need to replace anything other than the springs? I need a blower cam for my 370 build with a D1SC and it being maxed out. I will take it if it meets all the above LOL

 

It's a lil lumpy and will have a nice aggressive sound but in my opinion it is fully streetable. I was building this car to be able to drive cross country if I wanted with A/C and go to the track and run a 9. If your springs can take the lift I think you'll be fine. I have a few people interested in the cam. First one to get $ in my hand will get it.

 

i want the dampener and the shifter. depending where you are in chicago i can pick them both up from you tomorrow evening.

 

By far one of the best blower cams you can buy IMO. Wish this was around when i needed it. I ended paying $479 for mine

 

I think I need to go double check my receipt before I sell this thing!

 

well where do i send the money order to? I will send it off tomorrow inbetween classes brotha!

 

That was a typo. I meant 389. It was like 411 with shipping or something like that.

 

PM Sent....paypal ready for the cam.

 

Thanks for all teh interest, but I have a money order on the way for the cam already.

 

Thank you for holding that for me Sir, i really do appreciate everything.

 

No prob man this cam should work great for you! Now if I can sell this procharger kit I can go shopping for a new harley!

 

Up top for some good deals!

 

Up top.

 

Up top!

 

Up top.