Category: Accessories
Price: $900
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): NC
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

All the parts came off of my 2000 TA. The kit is a TTI 60-1 street kit with a A/R .96 hot side. I upgraded to a T76 and 2 1/2 inch piping with a bigger intercooler so these are just taking up space in the shop now. All parts have about 3-4K on them and are in good shape. The turbo is still tight and the blades look brand new with no evidence saw blading. I made 451 whp and 507 torque on a conservative tune through a 4L60 and 12 bolt. The intercooler that is used with this kits keeps the factory cooling system and bumper brace in place without modification.

I would like to sell every thing as a kit but i am willing to sell the parts separate to any one that wants them. Also willing to ship at buyers expense.

60-1 Turbonetics AR .96 $450
TTI intercooler $350
TTI cold side piping $200
Every thing $900

 

Pics of it installed?

 

There is not a hole lot to see. The turbo sits under the car on the driver side.

 

Bump $850 shipped!!!

 

Just a few updates. This comes with all the cold side parts but you will still need to buy the hot side parts from TTI or make your own. This kit sells hole for around 5500 bucks but you should be able to get this one up and running for well under 2500 for every thing. Maybe a little cheaper if you are skilled and can build the cross over pipe your self.

 

May take trade depending on what you have.

 

what kind of boost were you running when you made those #'s?

 

8.5-9 pounds.

I am open to trades or but money talks!

 

PM sent

 

Bump getting a lot of PM's but i need this stuff with all the other crap thats in my garage gone.

I will sell every thing for $700 but buyer will pay shipping.

 

man wish u had this for sale two months ago i would of bought this


and free bump for ya

 

As stated above this sale is only for the cold side parts and turbo you will still need to buy or build the hot side piping (manifold, cross over, down pipe, etc).

 

NOTE:

I will be adding the TTI manifold to this sale. This manifold cost $700 from TTI and is the most expensive part of the hot side. I may also add whats left of the down pipe if any one wanted to use it but i would recomend a new one. I should have the manifold off by next week and ready to ship.

Intercooler, sensors, piping, turbo, manifold, claps, filter, etc: $ 1000

 

Were those numbers on a stock motor?

 

Bone stock motor and heads with 100,000 plus miles.

 

Pm sent

 

sooo what were you thinking for trades?

 

damn you take visa if so pm

 

Location in nc? And does this kit retain a/c?

 

interested in turbo. No shaft play? Are you the origional owner of the turbo?