FS: Polished Vic Jr/rails
Thread Starter
Joined: Jun 2005
Posts: 5,221
Likes: 1
From: Skiatook, OK
FS: Polished Vic Jr/rails Category: Engine - Intake/Fuel
Price: $500
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): OK
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Non-LS Part
Last edited by BIG_MIKE2005; Jun 21, 2010 at 12:55 PM.
Thread Starter
Joined: Jun 2005
Posts: 5,221
Likes: 1
From: Skiatook, OK
No trades, need to sell this outright, sorry man.
manueltarin - I got a PM from someone interested in everything minus the elbow, it you would like just the elbow alone I'll let it go for $100 shipped. Let me know, thankx.
manueltarin - I got a PM from someone interested in everything minus the elbow, it you would like just the elbow alone I'll let it go for $100 shipped. Let me know, thankx.
Trending Topics
Thread Starter
Joined: Jun 2005
Posts: 5,221
Likes: 1
From: Skiatook, OK
Several PM's responded to, price isnt written in stone on the stuff left.
Shoot me a offer just dont try to cut my throat on it. Even at $600 whoever gets it is saving money VS buyin a new one & payin for it to be polished out, buyin the rails kit & having those PC'd, buying the AN fittings/hose.
Shoot me a offer just dont try to cut my throat on it. Even at $600 whoever gets it is saving money VS buyin a new one & payin for it to be polished out, buyin the rails kit & having those PC'd, buying the AN fittings/hose.
Thread Starter
Joined: Jun 2005
Posts: 5,221
Likes: 1
From: Skiatook, OK
More PM's anwsered.
Here is a little more info:
1) Intake is only externally polished, no internal modification
2) O-ring grooves were not machined into the intake, its as it came from Edlebrock
3) Intake has not been milled or modified ANY from how it arrived from Edlebrock minus the external polishing
4) The fuel rail kit is complete & I'm throwin in all the AN fittings & -6 hose I bought to install this. These have never been installed & were bought brand new.
I have recieved alot of PM's but still no payments, first one with the cash gets the intake package deal I'm offering. I have not seen another car running a polished Vic Jr, get it while its hot guys.
Here is a little more info:
1) Intake is only externally polished, no internal modification
2) O-ring grooves were not machined into the intake, its as it came from Edlebrock
3) Intake has not been milled or modified ANY from how it arrived from Edlebrock minus the external polishing
4) The fuel rail kit is complete & I'm throwin in all the AN fittings & -6 hose I bought to install this. These have never been installed & were bought brand new.
I have recieved alot of PM's but still no payments, first one with the cash gets the intake package deal I'm offering. I have not seen another car running a polished Vic Jr, get it while its hot guys.
