Hooker Catback, AL Driveshaft, ET Streets
Category: Wheels & Tires
Price: $350
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): IN
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Non-LS Part
I've got a pair of Greg Weld Dragstars SOLD
A pair of salad shooter wheels with 26x10.5-16 ET Streets mounted on them. The wheels are in ok shape (as good as salad shooters get). Tires are a little older, still have a bunch of tread left on them though. I cut 1.62s on them last year, haven't been used since. $250 picked up




I've got 3 stock driveshafts from 4th gens. 2 are steel shafts with new u-joints in them, the 3rd is an aluminum shaft with 65K on it. All worked great when removed. Looking for $50 for each of the steel shafts (have $30 in u-joints in them), and $100 for the aluminum shaft. Prices don't include shipping.

LS1 4th Gen Hooker AeroChamber Catback. The catback was welded onto the previous car, so it was cut off when removed. The cut on the front side of the I-pipe was on the Y-pipe, so it should have plenty of metal to install onto your Y. Second cut is right around where the pipe goes over the axle. Again, should be an easy one to weld back up. The tips are in good shape. $250 picked up.



Last edited by tchapma1; Jun 23, 2010 at 09:09 PM.


