hey guys, needing a few little bits and pieces to get my project back in gear

flexplate bolts - need the short ones, not the longer ones for the adapter. LS1 (well, 5.3L for now, using the LS1 block later) to 4L60E trans

bellhousing bolts - previous owner took em out, no clue why. need to the bolts that go from the bellhousing to the trans case.

torque converter - just stock, nothing crazy. would prefer lower miles.

Lemme know what you've got! Thanks guys

-Dan

 

for reference,GM parts catalog shows
for flexplate to crank:p/n #12553332 M11x1.5x23.5 Grd 10.9
for bellhousing to trans case:p/n #24203265 M10x1.5x45 10OD Torx Plus HD

 

thanks for the info. definitely has not been easy to find the flex bolts (M11's not too common), but i do thank you for the bellhousing ones. may be able to find somewhere else

 

http://www.gmpartsdirect.com/results.cfm

 

I have a 6.0 mated to a 4L60/4L65E. I have yet to figure out which trans it is. Its from a 04 Denali. It has ~100k on it. If it doesnt make a difference on which trans it is, ill take it apart for you.

 

I may have a lead on all of the parts, but I'll let you know what happens. thanks for the help so far guys!

 

ok, so i'm all set on bolts, but still in need of an inexpensive (stock) torque converter. thanks!

 

i got the stock 4l60e torque converter outta my 01 z28

 

I have a stock converter with 60,000 miles....$50 plus shipping or a Midwest 2800 converter with less than 10,000 miles for 150 plus shipping.

 

I have a stock 4L60E converter from an LS1 GTO with 7,000 miles on it that I was just about to list for sale here.

Shoot me a PM if you're interested.

 

Torque converter purchased from me

 

Pm me with price shipped to 85043 and pics. or post up here[/QUOTE]
I'd be happy to help you with new if nothing works out on the used market. Please visit our website, or contact me directly for assistance.
Thanks
Kevin
www.PartsTaxi.com