I need a ls1 4-channel rear end- I prefer 3.42 gears
I also need Stock rear springs
Thanks. 817-353-9562
I need these in the dfw asap!

 

ttt, added parts and edited the post.

 

ttt... still need these parts. Let me know what you have.

 

ive got a 323 3 channel...stick your backing plates on it and its 4 channel...

 

I have a set of rear stock SS springs , Im removing and putting my eibachs back in.

 

4 channels have the rings on the axles, and the 3 channels on the posi unit. It's not just a backing plate swap.

How much? If you are not in the dfw I am not interested. Shipping costs more than I am willing to pay for stockers.


Ok, I am looking for a 4 channel rearend that has the rings on the axles and not on the posi unit. It has to be a traction control rearend.

 

Also, I have had a couple of people here offering me 3 channel rears, they are not the same as 4 channels. Here is a pic of the axles so you guys can see why I want the 4 channel. It has the axles with rings on it. Length in a 3 channel and 4 channel are the same but the 3 channel does not have the rings. I can not just swap out backing plates... My car is setup for a 4 channel traction control.

 

TTT.. still need these things. I have cash in hand

 

i have a 3.42 rear from my 97 ws6 as well as rear springs in mckinney.

 

I think all lt1 rears are 3 channel non traction control. I need a 4 channel traction control rear.

 

these things are just taking up space in my garage, let me know if i can help.