As the title says.....I'm looking to buy a set of NON EGR Truck manifolds. 4.8, 5.3, 6.0L motors have them. These must have the heat shields as well. I'd prefer the style without the EGR 'bulge' on the one manifold.......



Any trucks out there who installed headers, and have them laying around, let me know. Thanks!!!

Andy

 

I have a set, no clue what to ask for them or how much shipping would be. Shipped from a 58265 zip(North Dakota):

 

PM sent

 

i have a set from my ls1 as far as i know all the exhaust manifolds were the same correct me if im wrong. they are cast iron with heat shields on them still. asking 50 for the pair and shipping is going to be about 25 through usps for the size of them. send me a pm if interested, need them gone. oh, they came off of an '00 f-body so they have the egr fitting on them.

 

I think you need the truck manifolds- hence the 'truck manifold' turbo buildups

"What year truck manifolds do I need to get? From what engine size too?
Basically you want to stay away from any truck manifold that has AIR/EGR ports.
02+ are good sources, from 4.8-6.0 trucks will work. Be sure to get the heat shields with them too."

 

I have two pair I have a pair with the bulge and a pair with the holes drilled but can block it off. One of the driver sides has been smoothed can smooth the others if you want.